Time not updating
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Plusnet Community
- :
- Forum
- :
- Help with my Plusnet services
- :
- Broadband
- :
- Re: Time not updating
Time not updating
29-04-2014 12:06 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
[tt]{admin}=>sntp list
IP Address Version Status Name
0.0.0.0 3 not used ntp.plus.net
{admin}=>:service system list name=SNTP expand=enabled
Idx Name Protocol SrcPort DstPort Group
---------------------------------------------------------------------------------
1 SNTP udp 123 123
Description................ Simple Network Time Protocol
Properties................. client
Attributes................. state port srcip qoslabel routelabel
User Managed Attributes.... state qoslabel routelabel
Attribute Values :
State...................... enabled
Port....................... 123
Source Ip Selection........ auto
QOS Label.................. None
Route Label................ None
{admin}=>:sntp config
SNTP configuration:
state = enabled
poll interval = 360 minute(s)
poll interval (before first sync) = 5 minute(s)
wanSubscribe = disabled[/tt]
What does this do, and should it be Enabled ? wanSubscribe = disabled
Re: Time not updating
29-04-2014 12:18 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
I've no idea what I'm looking at here, however could either of these be relevant...
IP address = 0.0.0.0
PN firewall is blocking port 123 ?
In another browser tab, login into the Plusnet user portal BEFORE clicking the fault & ticket links
Superusers are not staff, but they do have a direct line of communication into the business in order to raise issues, concerns and feedback from the community.
If this post helped, please click the Thumbs Up and if it fixed your issue, please click the This fixed my problem green button below.
Re: Time not updating
29-04-2014 12:32 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
So I can confirm that http://ntp.plus.net is working.
Re: Time not updating
29-04-2014 12:44 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
@Townman firewall is all good, i've not changed that. thanks for the tip though.
system settime
Set/Get date, time, timezone, daylight savings time, uptime.
Syntax : settime [date = <dd/mm/yyyy>] [time = <hh:mm:ss>]
[timezone = <(+ or -)hh:mm>]
[daylightsaving = <{disabled|enabled}>]
[geotimezonename = <{(UTC-12:00)|(UTC-11:00)|(UTC-10:00)|(UTC-
09:00)|(UTC-08:00)|(UTC-07:00)|(UTC-06:00)|
(UTC-05:00)|(UTC-04:00)|(UTC-03:30)|(UTC-
03:00)|(UTC-02:00)|(UTC-01:00)|(UTC)|
(UTC+01:00)|(UTC+02:00)|(UTC+03:00)|
(UTC+03:30)|(UTC+04:00)|(UTC+04:30)|
(UTC+05:00)|(UTC+05:30)|(UTC+05:45)|
(UTC+06:00)|(UTC+06:30)|(UTC+07:00)|
(UTC+08:00)|(UTC+09:00)|(UTC+09:30)|
(UTC+10:00)|(UTC+11:00)|(UTC+12:00)|
(UTC+13:00)}>]
[rtc = <{disabled|enabled}>]
Parameters :
[date = <dd/mm/yyyy>]
Set the system date
[time = <hh:mm:ss>]
Set the system time
[timezone = <(+ or -)hh:mm>]
Set the system timezone(-12:00...+14:00 / 15 minute resolution)
[daylightsaving = <{disabled|enabled}>]
Enable/Disable daylight saving
[geotimezonename = <{(UTC-12:00)|(UTC-11:00)|(UTC-10:00)|(UTC-09:00)|(UTC-
08:00)|(UTC-07:00)|(UTC-06:00)|(UTC-05:00)|(UTC-04:00)|
(UTC-03:30)|(UTC-03:00)|(UTC-02:00)|(UTC-01:00)|(UTC)|
(UTC+01:00)|(UTC+02:00)|(UTC+03:00)|(UTC+03:30)|
(UTC+04:00)|(UTC+04:30)|(UTC+05:00)|(UTC+05:30)|
(UTC+05:45)|(UTC+06:00)|(UTC+06:30)|(UTC+07:00)|
(UTC+08:00)|(UTC+09:00)|(UTC+09:30)|(UTC+10:00)|
(UTC+11:00)|(UTC+12:00)|(UTC+13:00)}>]
Set the geographical timezone by name
[rtc = <{disabled|enabled}>]
Enable/Disable the real time clock
[geotimezone = <{(HIDDEN)}>]
(HIDDEN)
[gtzn = <{(HIDDEN)}>]
(HIDDEN)
Re: Time not updating
29-04-2014 12:44 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
Quote :sntp list
IP Address Version Status Name
212.159.13.49 3 synchronized ntp.plus.net
:sntp config
SNTP configuration:
state = enabled
poll interval = 360 minute(s)
poll interval (before first sync) = 5 minute(s)
wanSubscribe = disabled
Re: Time not updating
29-04-2014 12:46 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
Re: Time not updating
29-04-2014 12:51 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
Re: Time not updating
29-04-2014 12:56 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
Quote from: 11110_110 is there a force update command for the ntp on the router ?
There is on mine, but then again I built my own router from old PC components and using pfSense software
What are you running your NTP service on ?
Re: Time not updating
29-04-2014 1:14 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
Re: Time not updating
29-04-2014 1:16 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
Quote from: ejs I guess the DNS lookup for ntp.plus.net failed at some point, and the router hasn't done another DNS lookup for whatever reason.
I have in mind that it may be my DNS configuration, looks like i will have to reset some stuff.
Re: Time not updating
29-04-2014 1:46 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
If you do, what response do you get from this: ?
dns client nslookup host=ntp.plus.net
Re: Time not updating
29-04-2014 2:16 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
Can't find ntp.plus.net: Syntax or semantic errors detected
Name: unknown
Address: none
Aliases: none
I'm just flushing my list now and putting something else in.
Re: Time not updating
29-04-2014 2:22 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
Name: ntp.plus.net
Address: 212.159.13.49
Type: IP
212.159.13.50
Type: IP
212.159.6.9
Type: IP
212.159.6.10
Type: IP
Aliases: none
How do i get around that problem now npr, i'm using my cache first to force my route ?
Edit: I need the time on the router for access control, it might be my unbound config blocking 192.168.0.254/10.0.0 etc
Re: Time not updating
29-04-2014 4:01 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
Quote from: 11110_110
How do i get around that problem now npr, i'm using my cache first to force my route ?
Don't know what you mean.
Do / did you have a valid name server in "dns server route list" ?
As I see it, the problem was either:
1) the name servers in "dns server route" was broken.
or
2) the name server in dns client was broken.
The default server here is:
Quote :dns client dnslist
Entry State Family Server
1 IDLE IP [port] 53 - [addr] 127.0.0.1
or
3) PN's name servers having a hiccup.
You could specify your RPi server in the dns client (in place of the local address 127.0.0.1) but that's not finding the cause of the problem -- ie was it something in the router or PN's name servers having a hiccup.
Re: Time not updating
29-04-2014 4:11 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
That way you should get better reliability because if one server is unreachable then another will take over,
and also you will get more resilience to DNS lookup failures.
I would initially suggest choosing a time server from this list - http://www.pool.ntp.org/zone/uk
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page