Speed and BT Speedtest profile

[#1]

Hi
I've just run a BT speedtest, it reports my profile at: 9902 Kbps however the Plusnet Stable Rate page says: Current line speed: 7.15 Mb
Is there a reason for this difference?
Overall I'm happy with the speed of my service, I've recently been moved to ADSL2+ from Max DSL to increase my upload speed and have been more concerned with disconnections (average once a day) than achievable speed.
I've attached some stats:

  --------------------------- ATU-R Info (hw: annex A, f/w: annex A) -----------
   Running Mode            : ADSL2+(G.992.5)       State                : SHOWTIME
   DS Actual Rate          : 11224615 bps   US Actual Rate       :  1248983 bps
   DS Attainable Rate      : 13984000 bps   US Attainable Rate   :  1248000 bps
   DS Path Mode            :  Interleave    US Path Mode         :  Interleave 
   DS Interleave Depth     :       96       US Interleave Depth  :        1 
   NE Current Attenuation  :       29 dB    Cur SNR Margin       :        9  dB
   DS actual PSD           :    20. 4 dB    US actual PSD        :    12. 6   dB
   ADSL Firmware Version   : 2471201_A 
  -------------------------------- ATU-C Info ---------------------------------
   Far Current Attenuation :       14 dB    Far SNR Margin       :        6  dB
   CO ITU Version[0]       : 00004946       CO ITU Version[1]    : 0000544e
   DSLAM CHIPSET VENDOR    : < IFTN >

[#2]

Hi nebula,
I've changed that for you now. You should see the increase in the next 15 minutes.
Jojo

[#3]

Hi, many thanks for looking at my connection.
I've completed internal and external re-wiring combined with isolation tests and managed to achieve a stable connection. Not sure if my efforts have affected my profile as I've disconnected multiple times to try various combinations; at your end my profile now reads:  'Current line speed: 8 Mb'
BT Speedtest reports: 11195 Kbps (attached)
SNR is low, 3 at night and up to 10 in the day -- highest I've ever seen so rewiring has at least made some improvements!

 --------------------------- ATU-R Info (hw: annex A, f/w: annex A) -----------
   Running Mode            : ADSL2+(G.992.5)       State                : SHOWTIME
   DS Actual Rate          : 12690468 bps   US Actual Rate       :  1294222 bps
   DS Attainable Rate      : 12320000 bps   US Attainable Rate   :  1296000 bps
   DS Path Mode            :  Interleave    US Path Mode         :  Interleave 
   DS Interleave Depth     :       64       US Interleave Depth  :        4 
   NE Current Attenuation  :       28 dB    Cur SNR Margin       :        3  dB
   DS actual PSD           :    20. 4 dB    US actual PSD        :    12. 6   dB
   ADSL Firmware Version   : 2471201_A 
  -------------------------------- ATU-C Info ---------------------------------
   Far Current Attenuation :       14 dB    Far SNR Margin       :        6  dB
   CO ITU Version[0]       : 00004946       CO ITU Version[1]    : 0000544e
   DSLAM CHIPSET VENDOR    : < IFTN >

Is there anything else I can do to stabilise my profile?
Thanks

[#4]

I get a similar result to you with the BT test using WiFi, but it is a lot higher using Ethernet.
The PN myspeedtest doesnt seem to care if it is WiFi or ethernet,