[Solved] Technicolor TG582n R10 Firmware

[#1]

Hi,
I just upgraded to the R10 firmware for my router, and I am currently adding my 2nd SSID by following http://npr.me.uk/mssid.html.
It follows the usual setup up until when I run the wireless mssid ifconfig command, it asks the following extra configuration questions that I am not sure how to answer.
[maxassociations]=
[WPAradiuskey]=
[WPArekeysec]=
[WPAradiusip]=
[WPAradiusport]=
[WPAradiusto]=
[WPAversion]=
[stationhistory]=
[convertmcast4]=
[convertmcast6]=
[convertbcast]=
If anyone knows that these mean or what I should answer for them, please say!

[#2]

If you use the following command you can see the default settings used by the master mssid:
wireless mssid iflist ssid_id=0
You can leave those unknown settings blank if you wish and the router will automatically enter the default settings for them.

[#3]

Ah, NPR, probably the best person to answer!
Thanks for that, I forgot to check whether or not I could just leave it black
dick:quote