cancel
Showing results for 
Search instead for 
Did you mean: 

Sagemcom Router

FIXED
malcb173
Newbie
Posts: 2
Registered: ‎17-08-2016

Sagemcom Router

The broadband and wifi lights flash quickly with the result that broadband does not work or extremely slowly. This happens constantly, using an ethernet at the same time is fine and if I momentarily disconnect the wifi on the router it becomes stable for a shot while.
3 REPLIES 3
Chris
Legend
Posts: 17,724
Thanks: 600
Fixes: 169
Registered: ‎05-04-2007

Re: Sagemcom Router

Fix

The lights flashing indicates something is transferring data across the network, if this is a lot of traffic (specifically upload) it can cause slowdowns.

 

It's worth changing the wifi password on your router and also try disconnecting each wireless devices one by one to see if that resolves the issue.

Former Plusnet Staff member. Posts after 31st Jan 2020 are not on behalf of Plusnet.
Cagney1994
Rising Star
Posts: 402
Thanks: 11
Fixes: 3
Registered: ‎28-07-2013

Re: Sagemcom Router

@Chris - Re. the 2704n router, is there any reason why I can't see all active devices on Wifi? Some are not showing at all. And as mentioned in a similar thread with the same router, the device name was showing as 'Joe Bloggs iPhone' but then changed to 'Unknown'.

 

Is there a fix to this?

malcb173
Newbie
Posts: 2
Registered: ‎17-08-2016

Re: Sagemcom Router

Many thanks and found the culprit which was stuck on upload.