cancel
Showing results for 
Search instead for 
Did you mean: 

Radius Log Request

Anotherone
Champion
Posts: 19,107
Thanks: 457
Fixes: 21
Registered: ‎31-08-2007

Re: Radius Log Request

OK, fair enough. I take it no SNRM graphs from after dark yesterday. Tonight's may not be especially helpful if the line is playing up.
jab1
Legend
Posts: 17,032
Thanks: 5,453
Fixes: 254
Registered: ‎24-02-2012

Re: Radius Log Request

Last two SNRM graphs available from last night - the desktop I use for overnight logging had been turned when I did some cable tidying in the 'office' , so only daytime logs from the laptop available atm.
Switched said machine back on earlier today and will leave it running.
John
Anotherone
Champion
Posts: 19,107
Thanks: 457
Fixes: 21
Registered: ‎31-08-2007

Re: Radius Log Request

OK then, will look out for updates as and when.
jab1
Legend
Posts: 17,032
Thanks: 5,453
Fixes: 254
Registered: ‎24-02-2012

Re: Radius Log Request

BT Speedtest results
John
jab1
Legend
Posts: 17,032
Thanks: 5,453
Fixes: 254
Registered: ‎24-02-2012

Re: Radius Log Request

Currents statistics:
Uptime: 0 days, 10:02:12
DSL Type: ITU-T G.992.5
Bandwidth (Up/Down) [kbps/kbps]: 804 / 8,012
Data Transferred (Sent/Received) [MB/MB]: 97.24 / 625.96
Output Power (Up/Down) [dBm]: 12.2 / 20.3
Line Attenuation (Up/Down) [dB]: 16.7 / 33.5
SN Margin (Up/Down) [dB]: 6.4 / 12.9
System Vendor ID (Local/Remote): TMMB / ----
Chipset Vendor ID (Local/Remote): BDCM / TSTC
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 1 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): -
Error Seconds (Local/Remote): 427 / 4
FEC Errors (Up/Down): 2,702 / 1,717
CRC Errors (Up/Down): 0 / 3
HEC Errors (Up/Down): 0 / 1
John
cedlor
Grafter
Posts: 687
Thanks: 2
Registered: ‎02-04-2015

Re: Radius Log Request

That looks pretty smooth if a bit slow. Once it stops dropping the speed may pick up.
jab1
Legend
Posts: 17,032
Thanks: 5,453
Fixes: 254
Registered: ‎24-02-2012

Re: Radius Log Request

Matthew W or MattyC  - while you're around the forums, any chance of a RADIUS log from 09/07 onwards, please?
John
jab1
Legend
Posts: 17,032
Thanks: 5,453
Fixes: 254
Registered: ‎24-02-2012

Re: Radius Log Request

Stats after power down (and picture taken - to follow)
Uptime: 0 days, 0:02:44
DSL Type: ITU-T G.992.5
Bandwidth (Up/Down) [kbps/kbps]: 780 / 12,040
Data Transferred (Sent/Received) [kB/kB]: 12.36 / 13.76
Output Power (Up/Down) [dBm]: 12.1 / 20.8
Line Attenuation (Up/Down) [dB]: 16.7 / 33.5
SN Margin (Up/Down) [dB]: 5.1 / 6.1
System Vendor ID (Local/Remote): TMMB / ----
Chipset Vendor ID (Local/Remote): BDCM / TSTC
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): -
Error Seconds (Local/Remote): 0 / 0
FEC Errors (Up/Down): 193 / 11,009
CRC Errors (Up/Down): 0 / 0
HEC Errors (Up/Down): 0 / 0
John
jab1
Legend
Posts: 17,032
Thanks: 5,453
Fixes: 254
Registered: ‎24-02-2012

Re: Radius Log Request

Connection box -hope it tells you enough
John
Anotherone
Champion
Posts: 19,107
Thanks: 457
Fixes: 21
Registered: ‎31-08-2007

Re: Radius Log Request

The wiring there is fine John, glad to see the correct standard of cable and jelly crimped joints.
With the stats, the DS is now back to what would be expected, but the US is a touch below par, no doubt being affected by the line issue that you are periodically seeing.
The overnight graphs look quite good suggesting that the line wasn't playing up at the time and isn't being significantly affected by MW propagation either (removal of the bell wire will have helped that latter issue).
Hopefully one the CRT will have time to respond to your request and post your VR graph today.
jab1
Legend
Posts: 17,032
Thanks: 5,453
Fixes: 254
Registered: ‎24-02-2012

Re: Radius Log Request

Thanks AO. Overnight seems to have held - I will post all available RS plots a little later (and a stats log).
My PN profile is still stuck, though - I would have expected it to increase overnight.
For information - the RS plots from the laptop are still showing those inverted spikes - strangely, the ones after the re-sync yesterday coincided with the JDAST hourly checks. Will keep my eyes on it when I'm home today (intermittantly).
VR graph would be nice.
Further comments when I post the other data.
John
cedlor
Grafter
Posts: 687
Thanks: 2
Registered: ‎02-04-2015

Re: Radius Log Request

Can you stop the JDAST running or change the timing on it?
jab1
Legend
Posts: 17,032
Thanks: 5,453
Fixes: 254
Registered: ‎24-02-2012

Re: Radius Log Request

cedlor - I don't  want to stop JDAST - it gives me too much useful info, but what I am doing from now is posting the graphs from my desktop, which is not running that program (and is also hard-wired, in case the wireless was also having an effect.
John
jab1
Legend
Posts: 17,032
Thanks: 5,453
Fixes: 254
Registered: ‎24-02-2012

Re: Radius Log Request

Statistics:
Link Information

Uptime: 0 days, 19:41:43
DSL Type: ITU-T G.992.5
Bandwidth (Up/Down) [kbps/kbps]: 780 / 12,040
Data Transferred (Sent/Received) [MB/MB]: 24.50 / 192.29
Output Power (Up/Down) [dBm]: 12.1 / 20.8
Line Attenuation (Up/Down) [dB]: 16.7 / 33.5
SN Margin (Up/Down) [dB]: 6.2 / 6.0
System Vendor ID (Local/Remote): TMMB / ----
Chipset Vendor ID (Local/Remote): BDCM / TSTC
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): -
Error Seconds (Local/Remote): 476 / 1
FEC Errors (Up/Down): 31,910 / 7,395,327
CRC Errors (Up/Down): 76 / 19,757
HEC Errors (Up/Down): 198 / 119,290
Pick a task...
John