Password protection for TG585 v7

[#1]

Can someone please advise what the default log on and password is for the new Plusnet/Thomson TG585 v7?
At the moment I type in 192.168.1.254 and it opens the user interface immediately. There must be some way to protect this!
Ta

[#2]

If it was a speedtouch supplied 585v7 then the login is
username: admin
password: admin
However a factory reset may change it to the Speedtouch default
User Name = Administrator
Password = blank (don't type blank just press return  Grin)
Note - they are case sensitive

[#3]

I have info that says
Username: Administrator
Passowrd - is the serial number ( exclding the brackets at the end and their content so something like
CP0800XX2XX
try when Jim said - and if it doesn't work the above

[#4]

Hmm - mine came from a post by James a while back - perhaps it has changed

[#5]

Just had a dig through the 585v6 manual (I used to have one) and memory was correct - you don't seem to need a password except for remote access or telnet

[#6]

There was great confusion about 6 months ago when a friend signed up and tried this password .
Just lokked at the very latest router instruction leaflet - which I received this week from PN and it doesn't mention it !.

[#7]

Since it is a Plusnet supplied router the default username will be Administrator and the password blank (there isn't one).
To change it go to Home -> Toolbox -> User Management  and click the Change my password link in the Pick a task list. Leave the current password box empty and enter a new one in the New and Confirm boxes. Click Change Password to make the alteration.

[#8]

Are you sure about that as that is the Speedtouch default and I thought Plusnet used the another one

[#9]

I said there was confusion !!
The documentation needs to be reviewed and made totally clear.

[#10]

there is no mention on the Plusnet Photocopy, but on the Thompson printed sheet it is definitely Administrator and the serial number on the label under the router.