cancel
Showing results for 
Search instead for 
Did you mean: 

New Router Won't hold the line

allwork
Dabbler
Posts: 11
Registered: ‎25-07-2012

Re: New Router Won't hold the line

Hi Matt,
Quote from: Matt
Hi there,
Looks like there were one or two drops:
Not sure if they were reboots by yourself though, but it does look like interleaving was applied to the line automatically on Sunday - profile hasn't dropped too much as a result though and is currently set to 5865 on BTs side and matched at 5800 on our side.

As it turns out, Draytek supplied me with a patch which means that it has been in play since late Thurs. I caused the drop on Sunday - no idea what Friday's was. This morning seems to be the router re-syncing at a higher sync as the current stats are:
> adsl status
  --------------------------- ATU-R Info (hw: annex A, f/w: annex A) -----------
  Running Mode            : ADSL2+(G.992.5)      State                : SHOWTIME
  DS Actual Rate          :  6648000 bps  US Actual Rate      :  888888 bps
  DS Attainable Rate      :  7852000 bps  US Attainable Rate  :  888000 bps
  DS Path Mode            :  Interleave    US Path Mode        :  Interleave
  DS Interleave Depth    :      511      US Interleave Depth  :        8
  NE Current Attenuation  :      42 dB    Cur SNR Margin      :        7  dB
  DS actual PSD          :    18. 8 dB    US actual PSD        :    12. 3  dB
  ADSL Firmware Version  : 232201_A
  -------------------------------- ATU-C Info ---------------------------------
  Far Current Attenuation :      18 dB    Far SNR Margin      :      13  dB
  CO ITU Version[0]      : 00004946      CO ITU Version[1]    : 0000544e
  DSLAM CHIPSET VENDOR    : < IFTN >
>

So, it seems that the line has synched back to a good level  Smiley .
Having said that, could you switch my line back to fastpath with uncapped upload speed?
Cheers,
Allwork
chrispurvey
Plusnet Alumni (retired)
Plusnet Alumni (retired)
Posts: 5,369
Fixes: 1
Registered: ‎13-07-2012

Re: New Router Won't hold the line

You connection has now become stable, I have placed the order for fastpath and set your upload to uncapped. This will take one working day to complete.
Hope this helps.