My Fibre is now activated

[#1]

BT Openreach Engineer been here half an hour ago and change new master socket and faceplate (MK2) and using his tool kit reading line sync pass 79999K/20000K and plugged BTO Modem with my Netgear DGND3700v2 wireless router and got this speed result below:

BTWholesale test is not working at present, so I cannot see exchange IP Profile yet.

[#2]

It can take a few days for your IP Profile to appear on there.

[#3]

Ok, it all looking good so far. The Engineer told me that I am the only first customer at the cabinet fibre (one user) blimey

[#4]

@goldenadsl,
I'm glad to hear the installation went to plan

[#5]

Thanks Adams. I suppose I cannot use BTW Speedtest to find out ip profile from the exchange for the next few days. Engineer was a nice bloke and show me the tool reading sync rate 79999K/20000K pass and say I am within 200m away from cabinet.
All setup here by openreach:

[#6]

Why the two homeplugs?

[#7]

I have change to one homeplug. My error. http://s5.postimg.org/z2t9ktovb/20140213_142749.jpg

[#8]

Quote from: AndyH

It can take a few days for your IP Profile to appear on there.

May I ask how long do I have to wait? BT Speedtest won't let me running Broadband Diagnostic Test to check current ip profile all day and overnight too.

[#9]

Your IP Profile is 77.44Mb.

[#10]

If the IP Profile is 77.44Mb then surely 1Mb knocked off would get me around 75-76Mb. (why it 72Mb? that's 5Mb big gab is missing. Like my old ADSL2+ it always 1Mb lower than BT & PN profile rate.
http://www.thinkbroadband.com/speedtest/results.html?id=139238313352620085442
jim:quote

[#11]

Your IP profile isn't known
That figure assumes that you are getting the maximum 80Mb sync and at this stage we have no idea what it actually is

[#12]

I try BT Speedtest just now. Still the same as yesterday since fibre activated.
The Performance Tester is currently unable to run a speed test for your broadband connection. Please try again shortly, however if this problem persists, raise the issue with your service provider.
Can plusnet please tell me how long do I have to wait for this BT Speedtest to appear? It's should work by now?

[#13]

Quote from: Melancholie

Your IP Profile is 77.44Mb.

You are correct. My plusnet current line speed showing:
Current line speed:
    77.4 Mb

[#14]

That is the default until a delta report is received so it isn't relevant

[#15]

my IP profile is 53.27 Mbps but for some reason it's going the other way.
Done a BTW test and the following?
Download speedachieved during the test was - 61.75 Mbps
For your connection, the acceptable range of speedsis 42.61 Mbps-53.27 Mbps .
Additional Information:
IP Profile for your line is - 53.27 Mbps
Confused about IP Profile stuff