Interleaving off/on button?

[#1]

Just noticed this feature in member centre?
https://portal.plus.net/my/account_maintenance/interleaving_control.html
Great news , I'm  getting more & more impressed with PN!
Do you thing they will offer snr controls as well in the near future ? There seems space for a few more buttons....
Choo

[#2]

That button has been there for quite a long time.

[#3]

I don't have it:

[#4]

It only appears if interleaving is turned on, I believe it has to be turned on by Plusnet, not just by DLM.

[#5]

My service only went live the other day, that might be the reason its only poped up today on my control panel ?

[#6]

Probably, do you know what your router is reporting?

[#7]

Its still under its  10 day training cycle so I've left things alone, this it what it was reporting the last time I looked....

Protocol: G.DMT Annex A
Downstream Rate: 5344 kbps 
Upstream Rate: 448 kbps 
Channel: Interleaved[]Impulse noise protection: 0.73
Delay of latency path:  8.00 m

Thx

[#8]

Yep, interleaving is turned on which is why you have the option.
Responding to the SNR tweaking point: it will never be available on ADSL Max, it isn't supported. You can just tweak your SNR with your router though, that's what I do :).

[#9]

Seems I'm on the 21cn network but provisioned on G.DMT due to BT calcs saying I'd sync below 4meg.
Jojo said, see how things go after 10 days before going over to adsl2+
A control SNR button would make life easier for those who's routers have a locked CLI.
Thx choo 

[#10]

If you try to outsmart the 21CN DLM by tweaking target noise margin you are likely to lose. Doing that is not something I would recommend unless experience shows the line is very stable.