I'm changing router, should PN do anything? (Billion BiPAC 7800N)

[#1]

The Plusnet supplied router that worked fine in my flat for the last couple of years has recently been migrated to my home following a switch from BT to PN to replace a faulty TP Link unit but it really can not cope with the demands of my home (big with lots of thick walls and ceilings).
I've ordered a Billion BiPAC 7800N Dual WAN ADSL2+/Broadband Wireless-N Gigabit Firewall Modem Router from Amazon. Apart from the usual configuration changes I need to make is there anything I need to ask PN to do with regard to line settings/training to get the best out of the new unit?
Advice on best settings for this device from anyone who has one would also be welcome.
TIA,
Stuart

[#2]

Hi, PN don't need to do anything. Before your switch over to the new one I would suggest doing a disconnect on your current router (if possible) before powering off. That would ensure the exchange knows it's not a line drop.
I've found the default settings work fine on my 7800N

[#3]

Great. Thank you very much.