Connect at 6752 but....
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Plusnet Community
- :
- Forum
- :
- Help with my Plusnet services
- :
- Broadband
- :
- Re: Connect at 6752 but....
Connect at 6752 but....
01-11-2008 4:52 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
SNR is 9 in daytime and downstream attenuation 45/46
Re: Connect at 6752 but....
01-11-2008 5:23 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
For your sync it should be in the region of 6000.
If it's less than that it may be that you've had a sync that knocked your profile down a bit and you'll need to wait until it rises back up. If it stays low after 3 days and you're still syncing at 6752 you'll need to give PN a nudge to get it aligned with BT's figure (which you can get by running the BT speedtester).
If it's saying 6000, tweaking your MTU and RWIN settings may be worth a go - have a look here for some info. (Mine is set to MTU=1430 and RWIN=166800 on my Xp machine and gives me good results).
Re: Connect at 6752 but....
01-11-2008 5:28 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
BTW router is always on.
Re: Connect at 6752 but....
01-11-2008 5:39 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
The figure will tell you if PN have set your line incorrectly - a sync of 5500 will give you a profile of 4500 and 6572 will give you 6000 so it may be that PN haven't set your profile correctly.
MTU/RWIN is worth a try as that may give you an increase in speed.
Re: Connect at 6752 but....
01-11-2008 10:32 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
You're right. profile is stuck at 5500, and for some reason it's greyed out too. Isn't it usually in bold?
Perahps some one will look at it come Monday
Re: Connect at 6752 but....
03-11-2008 9:56 AM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
but as said the 6752 synch has been maintained for some while, and profile is still 5000.
TBH I'm puzzled about the synch rates, for as far as I know nothing has been going on at my exchange (Ringwood, Hants)
FWIW I have attached a RouterStats file.
Hopefully on of our bright PN lads will come up with something!
RouterStats log also added
Re: Connect at 6752 but....
03-11-2008 3:50 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
Sat, 2008-10-11 16:39:00 - Loss of synchronization :2
Mon, 2008-11-03 00:56:39 - Loss of synchronization :3
From the log the above are the recent sync losses after#2 I resynchd @6752 and after '#3 @ 7040
Has no one a clue or interest what is happening; why my profile speed is not only stuck but also not in the usual bold.
I suppose I could raise a ticket, but I have doubts about its effectiveness.
Re: Connect at 6752 but....
03-11-2008 3:54 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
To get a profile of 6000Kbps you have to sustain a sync speed in excess of 6816Kbps.
From what you've said, you've only been syncing above that since this morning.
Re: Connect at 6752 but....
03-11-2008 6:18 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
Re: Connect at 6752 but....
07-11-2008 6:48 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
Re: Connect at 6752 but....
07-11-2008 6:53 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
Re: Connect at 6752 but....
07-11-2008 10:04 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page