Bit of a result!

[#1]

I've changed your profile from 14300 to 14700.

[#2]

Weird thing over the weekend,router loss connection and reset itself,fine i thought till i checked routerstats....it reconnected the noise margin 3db lower (currently @  3.5db) and consequently sync now @ 18,217.
Have tried a cold boot of the router but it still connects at or around 3db noise margin,now would this be a case of the router giving up the ghost or something line based causing this?
.......Also,just noticed the PN profile now showing @ 14500.

[#3]

Obviously, DLM considers your line sufficiently stable for the noise margin to be lowered to that level - my line has been at 3dB for some time, though the sync has been varied slightly in that time. If the error rate goes up too much, it will probably change it's mind Your PN profile may change soon to match - enjoy it while it lasts

[#4]

It is chucking up a few errors,tho the can`t say i`ve noticed anything with either playing games (ping),downloading or streaming.
If that is the case,when you see it Chris can up kick the profile again?

[#5]

Hi,
I've given your profile a nudge, that should take effect shortly. I can also see a high number of errors on your line, that would concern me to be honest. It's likely due to your low SNR. If you start to have any problems, it may need shifting up to 6db.

[#6]

That`s what i was thinking about those errors Chris,would it have been the DLM that kicked me down that low or could it have been the router/line?

[#7]

Well to be truthful, DLM will automatically put your SNR up to 6db if it felt the errors were causing your line to become unstable.
Looking at your graph:
<img src="http://ccgi.psmith12.plus.com/visradius/generated/image13629958909462.png"/>
I'm not sure they are causing you huge problems.

[#8]

Yea,like i said not really noticed anything to stand out in bad performance of the line as of yet.......just dropped the line to get the new profile you set,i`ll see how it goes today,thanks Chris.

[#9]

No problem, fingers crossed, you should see an improvement

[#10]

Seems like DLM saw sense,router just restarted and now bach to 6.5db noise margin and a sync of 16283.
No idea why it thought things were ok to drop me down 3db this morning.

[#11]

DLM is off on one again,just cold booted the router and it`s brought me up to 3.5db noise margin from 2.5.db over the weekend.
Link Information
Uptime: 0 days, 0:03:23
DSL Type: G.992.5 annex A
Maximum Bandwidth (Up/Down) [kbps/kbps]: 1,220 / 19,232
Bandwidth (Up/Down) [kbps/kbps]: 1,221 / 17,834
Data Transferred (Sent/Received) [kB/kB]: 248.00 / 466.00
Output Power (Up/Down) [dBm]: 12.0 / 20.0
Line Attenuation (Up/Down) [dB]: 11.5 / 25.0
SN Margin (Up/Down) [dB]: 6.5 / 3.5
Vendor ID (Local/Remote): TMMB / IFTN
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 1 / 0
FEC Errors (Up/Down): 0 / 495,755
CRC Errors (Up/Down): 32 / 975
HEC Errors (Up/Down): 7 / 21,934

As you see,few errors popping up,tho as before not really noticing it with my usual net usage from day to day. Would fixing the noise margin @ 6db (if possible) help or like before,just leave it be and see how the cookie crumbles?

[#12]

Hi,
If the errors aren't causing you any issues whilst using the broadband, I would leave it as it is. I can fix your SNR to 6db if you prefer though.

[#13]

Dl speed seems a little more erratic than usual this morning,going to try another gateway hop and see if that improves it,otherwise it`s situation normal apart from the drop in nm and increase in sync speed (which the profile your side hasn`t caught up with again ).

[#14]

Just bumped your profile on our side to 15700 to match the one on BTs, hope things do improve further for you.