cancel
Showing results for 
Search instead for 
Did you mean: 

Setting up BT Homehub by telnet

mortod
Newbie
Posts: 7
Registered: 04-12-2009

Setting up BT Homehub by telnet

Have modified a BT Homehub 2.0 so that VOIP will work with other than BT. Using telnet to set up VOIP, but not sure what the various parameters should be. Have tried the following:
voice profile add
SIP_URI = nnnnnnn
[username] = nnnnnnn@sip.plus.net
[password] = ********
[password] = ********
[display name] = (whatever you want as your name)
voiceport = COMMON
[abbr] =
and,
voice sip config primproxyaddr=nat.plus.net:5082
voice sip config primregaddr=sip.plus.net
voice sip config notifier_addr=sip.plus.net
config save filename=user

But the telphony settings page on the HH2 shows 'Service temporarily unavailable'. Any thoughts?
3 REPLIES
Community Veteran
Posts: 6,249
Thanks: 430
Fixes: 39
Registered: 30-07-2007

Re: Setting up BT Homehub by telnet

Try swapping the SIP_URI and Username fields around. I seem to recall some while ago a similar config arrangement with a Vovager 10v. In that case the username needed to be just your Sip Id.
mortod
Newbie
Posts: 7
Registered: 04-12-2009

Re: Setting up BT Homehub by telnet

Thanks for the advice.Sussed it in the end, by logging into the homehub and reviewing all the parameters that could be set, namely:
{bthhmod}=>voice profile add
SIP_URI = nnnnnn
[username] = nnnnnn
[password] = ********
Please retype password for verification.
[password] = ********
[displayname] = My Name
[voiceport] = COMMON
[abbr] =
[enable] =
[directorynumber] =
{bthhmod}=>voice sip config useragentdomain=sip.plus.net
{bthhmod}=>voice sip config primproxyaddr=nat.plus.net
{bthhmod}=>voice sip config proxyport=5082
{bthhmod}=>config save filename=user
{bthhmod}=>

zeb1801
Newbie
Posts: 4
Registered: 16-02-2011

Re: Setting up BT Homehub by telnet

Excellent stuff - works perfectly now - thanks!!