cancel
Showing results for 
Search instead for 
Did you mean: 

Netgear DG632 Router question

N/A

Netgear DG632 Router question

On the configuration setting for this Modem.Router it asks for VCI and VPI settings
Below is part of the settings. Does anybody know what these VPI or VCI setting should be.?

Modem
ADSL Firmware Version 1.00.09.00
Modem Status Connected
Connect Mode T1413
Down Stream 1152kbps
Up Stream 288kbps
VPI 0
VCI 38
5 REPLIES
N/A

Netgear DG632 Router question

The values shown ther are correct (0 & 3Cool.
N/A

Netgear DG632 Router question

Thanks Phillip, it must have been a good guess by myself then as just entered these values but the connection seems to working well anyway.

BTW anybody who is thinking of getting this router don't bother as it is horrendous
to set up.
keithcalder
Grafter
Posts: 182
Registered: 03-08-2007

Netgear DG632 Router question

I have the wireless model, D834g and had it up and running in under 5 minutes, auto detect Isp and all settings. I thought the 834 was the same, oh well, we learn something new every day, the wireless jobbie is good though.
N/A

Netgear DG632 Router question

The Netgear DG834 is the same as the DG834G just without the Wireless capabilities. The DG632 is a seperate model and not from the DG834 Range.

http://www.netgear.com/products/details/DG834.php

http://www.netgear.com/products/details/DG632.php

See these pages for the two seperate wired Routers.
N/A

Netgear DG632 Router question

I have this router and it is a piece of the proverbial to set up by the way! That is if you can manage to type and IP address! LOL

Even the complicated stuff like port forwarding is a doddle; try setting it up on ciscos like i do!

Jake