cancel
Showing results for 
Search instead for 
Did you mean: 

Linksys wag54gs - where do I find the line stats?

N/A

Linksys wag54gs - where do I find the line stats?

title says it all really.

:?:

Ray
19 REPLIES
Community Veteran
Posts: 1,653
Registered: 13-06-2007

Linksys wag54gs - where do I find the line stats?

This should help you


Quote


Line stats are only available on v2 of this router.

From the web interface http://192.168.1.1
> Status
> DSL Connection

Default username and password are "admin".



From Kitz
http://www.kitz.co.uk/adsl/frogstats.htm
N/A

Linksys wag54gs - where do I find the line stats?

Sadly that only gives line speeds :
Downstream Rate: 2272 Kbps
Upstream Rate: 288 Kbps

and not the signal to noise ratio etc.

Ray
N/A

Linksys wag54gs - where do I find the line stats?

Quote
and not the signal to noise ratio etc.


It does......... just calls it something different "Margin"
Heres mine.

DSL Status : Up
DSL Modulation Mode : GDMT
DSL Path Mode : FAST
Downstream Rate : 2272 Kbps
Upstream Rate : 288 Kbps
Downstream Margin : 29 db
Upstream Margin : 31 db
Downstream Line Attenuation : 13
Upstream Line Attenuation : 8
Downstream Transmit Power : 0
Upstream Transmit Power : 0
N/A

Linksys wag54gs - where do I find the line stats?

L:shock: ks like I am missing something. Looky

Maybe the WAG54GS is not like the WAG54G version2

Ray
N/A

Linksys wag54gs - where do I find the line stats?

Quote
Maybe the WAG54GS is not like the WAG54G version2


Sorry about: that I overlooked the fact that yours is a "54G" whereas mine is a "354G"

But a bit of a long shot try entering http://192.168.1.1/SysInfo.htm perhaps if it does not put the information on the main page it may show it there.No way I am sure though..... although I feel it must show the information somewhere.
N/A

Linksys wag54gs - where do I find the line stats?

A blank page comes up, entitled "(untitled)"

...and the status line says "done".
..........................................

I've downloaded the sources for the firmware, I'll try and find some clues in that.
Maybe I should learn SNMP and see if that would let me in.

Little boxes, little boxes, little boxes made of tikky-takky

Ray
N/A

Linksys wag54gs - where do I find the line stats?

Unfortunately I have had it confirmed from Linksys support that Line Stats are not available on this model!

Dear XXXX, (amended)


Thank you for contacting Linksys Customer Support.

WAG54GS does not have the SNR (signal-to-noise ratio) or Line Attenuation compared to Netgear. In addition to that, there is no Linksys device/router which has the same capability.

If you have any further questions, feel free to visit our Knowledge Base at www.linksys.com/kb or send us an email at support@linksys.com so that we can assist you.


Sincerely,

Amended to delete name
Badge ID 15031
Product Support Specialist
Linksys – A Division Of Cisco System, Inc.
Website: www.linksys.com
N/A

Linksys wag54gs - where do I find the line stats?

Quote
WAG54GS does not have the SNR (signal-to-noise ratio) or Line Attenuation compared to Netgear.

Oh really? brackens, fence et al: the WAG54GS has SNMP functionality, and the SNR and attenuation figures can be seen using an SNMP browser such as MIB Browser. Using that I can tell you that my current downstream SNR margin is 30.2 dB, and attenuation is 34.0 dB. You certainly can't get at these figures from the web browser interface, but those stats are there alright, and many more. The "hidden pages" that have been mentioned related to WAG354G models don't work for GS or GX2 models, I believe.
N/A

Linksys wag54gs - where do I find the line stats?

Hi @bracken,

Thanks for that!

I have found here on the forum Tutorials & FAQ : Obtaining line stats from a Linksys Router
Linky

It describes using SNMP to pull the data out.

Ray
N/A

Linksys wag54gs - where do I find the line stats?

So that's where pcsni put it...:mrgreen:
N/A

Linksys wag54gs - where do I find the line stats?

@fence

Were you sucessfull? when I tried it a while back, I couldn't find an ADSL-LINE-MIB file listed for either localhost 127.0.0.1 or the IP Address of the router?
N/A

Linksys wag54gs - where do I find the line stats?

brackens, you've got to download that ADSL-LINE-MIB file from the relevant website, then unzip it and load it into MIB Browser. But you did that of course! Then you configure MIB Browser with your router's IP address and SNMP details etc., make sure SNMP is enabled on the router, and walk the MIB.
N/A

Linksys wag54gs - where do I find the line stats?

ske 1fr

Oops, your instructions couldn't have been clearer but I still forgot that bit Shockedops:

All working now though. Many thanks Cheesy
N/A

Linksys wag54gs - where do I find the line stats?

(smacks forehead with palm of hand):roll:

Please tell me you're not getting the same figures as me in the example. Mine is rock steady at that rate.