i keep loseing connection and its very slow unable to do anything i am on my mobile date to wright this as i could not connect and it told me the web page is not avaible i need help as i need to finish my course work off.
my router is in the master socket and i have turned it off and back on but nothing i need this sorted soon can anyone help.
Fixed! Go to the fix.
Re: nothing working need help
I'm sorry that you're experiencing problems with your connection and for the inconvenience that this is causing.
I've tested your line and the test indicates that your line is currently syncing at 2.4mbps, which is within the line's estimates of 1- 3.5mbps. However, there are some underlying connection errors that will be affecting the connection on your side:
|xDSL Status Check|
|Circuit ID:||CBUKXXXXXXXX||Service ID:||BBEUXXXXXXXXX|
|Telephone NO.:||NA||Test Executed On:||04-02-2019 13:09:09|
|xDSL Status Test Summary|
|Sync Status:||Circuit In Sync|
|NTE Status:||NTE Power Status:||PowerOn||Bypass Status:|
|Upstream DSL Link Information||Downstream DSL Link Information|
|Maximum Stable Rate (KBPS):||2272||Fault Threshold Rate (KBPS):||1817|
|Mean Time Between Retrains (Seconds):||28777||Mean Time Between Errors Upstream (Seconds):||2698|
|Indicative Line Quality:||A||Mean Time Between Errors Downstream (Seconds):||206|
The signal to noise ratio (SNR) is too low for the length of your line. The SNR helps the line to remain stable and unaffected by noise or interference on the line. The higher the setting for SNR, the higher the level of noise can be tolerated.
The SNR for your line was set too low for the amount of interference we'd expect to see, so by increasing this we expect the connection to now stabilize and for the information to be received without interference. Please monitor the connection over the next couple of days. If you don't see an improvement in your connection after this, please can you run through our troubleshooting guides here and let us know how you get on.
| Emily D|
Plusnet Help Team