PlusNet seem to have forgotten my request of 29 April for the same firmware update and put a request of 1 May in front of it. Is the process really as haphazard ('luck of the draw") as it seems?
I tried a hard reset, unplugging it and turning back on but it is stuck with a solid red power light and a flashing green Ethernet light. It was on from 10am until 3pm also, so I'm not sure you can detect it from your end anymore?
Sorry, that was indicated to me, I didn't know that you were stuck with a red power light. That's fine, the replacement router should be with you as quickly as we can get it out (bearing in mind the Bank Holiday on Monday).
Sorry Chris , I've been away and was unable to answer your question. It was 10.2.5.2 that I was trying to update to but I see it's been done now. Thank you.
My WD MyBook Live became unavailable and the help at WD said to make sure firmware is the latest. I have the TG582n FTTC with firmware 8.C.M.0. Please push the update down to my router. I am surprised that there isn't a utility in the router for this like my old Netgear router had.
Thank you. What is the difference between Plusnet - FTTC - TG582n (with USB port) - 10.2.5.2 and Plusnet - FTTC - TG582n (with USB port) - 10.2.5.2.FO ? My problem is that since I upgraded to Fibre Essentials and started using the Plusnet - FTTC - TG582n my WD NAS could no longer access the internet and I therefore no longer had remote access to it. It worked fine with Plusnet BB using a Netgear router. WD suggest assigning manual port forwarding to fix this but I cant see how to do this with the FTTC - TG582n. Can I tell the router to allow internet access for the WD NAS?
