cancel
Showing results for 
Search instead for 
Did you mean: 

TG582n Access Control configuration via Telnet?

FIXED
Robz
Grafter
Posts: 33
Thanks: 8
Registered: ‎21-01-2019

TG582n Access Control configuration via Telnet?

Hi Folks, is it possible to adjust the settings illustrated below via the telnet interface.

I have searched the routers CLI (telnet Command Line Interface) manual  here for the likely commands with no luck yet.

access-control.png

2 REPLIES 2
Dan_the_Van
Aspiring Pro
Posts: 476
Thanks: 34
Fixes: 4
Registered: ‎25-06-2007

Re: TG582n Access Control configuration via Telnet?

Fix

Hi @Robz 

This is a very old device and some of the useful information has been removed. A valuable source of information was found at http://npr.me.uk this site has closed.

However all is not lost you can retrieve the pages from  https://web.archive.org 

Search for http://npr.me.uk/accesscontrol.html  important you go back to 2012.

You can export the routers config file and it is a text file, the section you are looking for is [tod.ini] Suggest using notepad++ to view it

Hope this helps

Dan.

BTW this really should have been posted in 'My Router'

Robz
Grafter
Posts: 33
Thanks: 8
Registered: ‎21-01-2019

Re: TG582n Access Control configuration via Telnet?


@Dan_the_Van wrote:

Hi @Robz 

This is a very old device and some of the useful information has been removed. A valuable source of information was found at http://npr.me.uk this site has closed.

However all is not lost you can retrieve the pages from  https://web.archive.org 

Search for http://npr.me.uk/accesscontrol.html  important you go back to 2012.

You can export the routers config file and it is a text file, the section you are looking for is [tod.ini] Suggest using notepad++ to view it

Hope this helps

Dan.

BTW this really should have been posted in 'My Router'


Great post, thank you, I shall give it a whirl . . . .