Router and Profiles

[#1]

Thanks Matt, Will give it a fair chance and see if no probs crop up.
jono

[#2]

Hi, I turned off interleaving yesterday and have just checked my account area, the selection is no longer shown, I take it that its becouse I've turned it off but my router is still showng Interleaving, I rebooted the router to see if it changed and it hasn't, First time I've tried with interleaving off.
any info please ?
regards
Jono

[#3]

Hi me again, I've just checked the results in my router area and since rebooting the router just over 15 mins lapsted the FEC errors are 546, I thought I had cured the problem changing the filter unless its with turning interleaving off.
Could Matt advise please. As you can see it says    channel mode        Interleave

DSL Connection
Link Information

Uptime: 0 days, 0:15:07
DSL Type: G.992.1 annex A
Channel mode: Interleave
Maximum Bandwidth (Up/Down) [kbps/kbps]: 1,240 / 7,968
Bandwidth (Up/Down) [kbps/kbps]: 448 / 7,808
Data Transferred (Sent/Received) [kB/MB]: 0.00 / 20.30
Output Power (Up/Down) [dBm]: 12.0 / 8.0
Line Attenuation (Up/Down) [dB]: 0.0 / 4.0
SN Margin (Up/Down) [dB]: 29.0 / 9.5
Vendor ID (Local/Remote): TMMB / TSTC
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 0 / 0
FEC Errors (Up/Down): 0 / 546
CRC Errors (Up/Down): 0 / 35
HEC Errors (Up/Down): 0 / 43

regards Jono

[#4]

Hi Jono,
Looks like the order was placed but changed interleaving from on to auto, so it's still in effect - sorry about that. I've placed a manual order to turn it off which should complete for you tomorrow.

[#5]

Hi Matt and thanks, Could I ask a question please, dont know much about it but here goes, The read out I posted last night was worse than the one before, I rebooted the router thinking it needed it to show interleaving off on my router. I got worse readings after doing so, I rebooted again and now my router is showing as below which is not bad, how come its showing bad readings  ( what I call bad readings that is)  then after reboot of router its reading ok with few errors, I thought it was line problems that caused poor errors.
Mind I had a look out of my back window yesterday and about 10 work vans were parked outside the exchange, but I would have thought what they are doing should not affect my broadband, i think they are working on the fiber optic.
Any clarification would be appreciated


DSL Connection
Link Information

Uptime: 0 days, 18:16:38
DSL Type: G.992.1 annex A
Channel mode: Interleave
Maximum Bandwidth (Up/Down) [kbps/kbps]: 1,224 / 7,808
Bandwidth (Up/Down) [kbps/kbps]: 448 / 7,648
Data Transferred (Sent/Received) [kB/MB]: 0.00 / 198.96
Output Power (Up/Down) [dBm]: 12.5 / 8.0
Line Attenuation (Up/Down) [dB]: 0.0 / 4.5
SN Margin (Up/Down) [dB]: 29.0 / 10.5
Vendor ID (Local/Remote): TMMB / TSTC
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 0 / 0
FEC Errors (Up/Down): 0 / 341
CRC Errors (Up/Down): 0 / 0
HEC Errors (Up/Down): 0 / 0
regards
jono

[#6]

Hi jono,
Lines can vary from hour to hour or day to day, so you can often see this kind of fluctuation. Are the errors impeding your use of the internet?
Jojo

[#7]

Hi Joanne, no not up to now, just couldn't understand why I had a load of FEC errors in 15min and when rebooted router only have 341 in now over 20 hrs, never noticed before got new router, used to switch off my old one every night, since I got the new one I read I shouldn't be doing that.
Thanks for the clarification anyway, I get on tests regular speeds of about 6mb, thought it would be higher than that with being so close to exchange but hopfully they will activate the adsl2 in the future.
regards
Jono

[#8]

Hi, I've had interleaving turned off and has been stable over the last two days, I'm posting the results of router readings and the result of BT Wholesale to see if its possible to have my IP profile increased, its 6.5 at the moment.
I'm having problems transferring the reading from BT so will enter manually.
Results are estimated adsl Max line 8mb so speed should be between 7and 8mb.

DSL Connection
Link Information

Uptime: 2 days, 7:25:14
DSL Type: G.992.1 annex A
Channel mode: Fast
Maximum Bandwidth (Up/Down) [kbps/kbps]: 1,264 / 8,128
Bandwidth (Up/Down) [kbps/kbps]: 448 / 8,128
Data Transferred (Sent/Received) [kB/MB]: 0.00 / 268.30
Output Power (Up/Down) [dBm]: 12.0 / 8.0
Line Attenuation (Up/Down) [dB]: 0.0 / 4.0
SN Margin (Up/Down) [dB]: 30.0 / 8.5
Vendor ID (Local/Remote): TMMB / TSTC
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 0 / 0
FEC Errors (Up/Down): 1 / 0
CRC Errors (Up/Down): 0 / 316
HEC Errors (Up/Down): 0 / 364

[#9]

Hi jono,
I see it's back up to 7150 now.
Jojo

[#10]

Hi, Thanks very much.
regards
jono