Hi
I've recently installed a new router and have noticed jumps in the Bit Errors. On trying to eliminate how these are occurring i seem to have narrowed it down to incoming calls. The last two calls the errors have increased by approx. 1500. I can't say i noticed this on the router that i replaced. I've recently had a new master socket replaced by BT after a line fault, this has increased my sync speeds to the router stats below.
The router is plugged into the master socket with a filter, one extension to cordless phone downstairs with a filter on this, no ring wire on extension.
Any thoughts on what is causing this and how to stop the errors, or do i need to be concerned as everything seems to be working OK?
Version Info
Firmware Version: 1.0.5 Build 140321 Rel.42949
Hardware Version: TD-W8968 V3 0x00000001
System Running Time: 5Day(s) 17:26:02
Statistics -- xDSL
Mode: ADSL_2plus
Traffic Type: ATM
Status: Up
Link Power State: L0
Downstream Upstream
Line Coding(Trellis): On On
SNR Margin (0.1 dB): 31 59
Attenuation (0.1 dB): 250 110
Output Power (0.1 dBm): 0 126
Attainable Rate (Kbps): 20,076 1,212
Path 0 Path 1
Downstream Upstream Downstream Upstream
Rate (Kbps): 19,015 1,215 0 0
MSGc (# of bytes in overhead channel message): 51 12 0 0
B (# of bytes in Mux Data Frame): 225 37 0 0
M (# of Mux Data Frames in FEC Data Frame): 1 1 0 0
T (Mux Data Frames over sync bytes): 3 4 0 0
R (# of check bytes in FEC Data Frame): 0 0 0 0
S (ratio of FEC over PMD Data Frame length): 0.3797 0.9934 0.0 0.0
L (# of bits in PMD Data Frame): 4761 306 0 0
D (interleaver depth): 1 1 0 0
Delay (msec): 0 0 0.0 0.0
INP (DMT symbol): 0.00 0.00 0.0 0.0
Super Frames: 0 0 0 0
Super Frame Errors: 4,589 262 0 0
RS Words: 0 879,050 0 0
RS Correctable Errors: 0 0 0 0
RS Uncorrectable Errors: 0 0 0 0
HEC Errors: 18,877 311 0 0
OCD Errors: 186 0 0 0
LCD Errors: 186 0 0 0
Total Cells: 2,091,851,395 1,230,245,455 0 0
Data Cells: 33,735,374 3,173,651 0 0
Bit Errors: 0 16,007 0 0
Total ES: 2,946 173
Total SES: 24 0
Ron
