Full Service System List 8.C.M.0 FTTC Required

[#1]

Hi, all
Anybody got a full default/unchanged full service system list for a TG582n 8.C.M.0 FTTC please. I've got myself into a pickle and lost my original. I think the command is as follows for the full list. The list is a bit long winded 
service system list expand=enabled

[#2]

Yes that command is correct or just "service system list" for a briefer version.
The following link will show the default settings, look in the
[ servmgr.ini ] section. The settings are unlikely to have changed between firmware versions.
http://beusergroup.co.uk/technotes/index.php?title=582n_default_config

[#3]

Cheers npr,
Perfect 

[#4]

I think the exact setup of that servmgr.ini section is somewhat specific to O2, considering all those IP addresses added for remote access to various services, and also the wan ping responder appears to have been enabled.

[#5]

It's listed as "default config"----- it clearly is not 
Those IP addresses and ping responder settings are not the default for O2. 

[#6]

I'm only using it as a guide. So all good
@ejs i think the ping responder is enabled, but for lan only

14 PING_RESPONDER   icmp                      8                                 
         Description................ ICMP echo responder
         Properties................. server
         Attributes................. state aclip aclif aclifgroup map log qoslabel routelabel natpmweight
         User Managed Attributes.... state aclip aclif aclifgroup log natpmweight
         Attribute Values :
         State...................... enabled
         QOS Label.................. None
         Route Label................ None
         NAT Portmap Weight ........ 30
         Ip Access List............. any
         Interface Access List...... any
         Interface Group Access List lan
         Map List................... 8 
         Logging.................... disabled

Also i didn't see earlier that all none standard settings have a label like so "(administratively) disabled"