Check out my stats, err, baby!

[#1]

Hi Guys,
No idea where the report of G922.5 is coming from, but definitely was ADSL1. I've placed the order now to put it on ADSL2+ and uncapped the upstream. This should complete tomorrow.
Jojo

[#2]

Hi Jojo,
Thanks for this - tomorrow? really? That's super fast...
Jim - sorry for the quote
Well I can feel my connection reeling already - I don't know if it's the button you pressed Jo but it's been all over the place for the last few mins
Let see what this thing does

[#3]

Yes, tomorrow. Not sure anything I did will have made any effect now though

[#4]

Interesting - no worries - could have been coincidently the server I was connected to at the time.
Will report back!

[#5]

In the interest of science.

Uptime: 0 days, 8:07:39
DSL Type: G.992.5 annex A
Maximum Bandwidth (Up/Down) [kbps/kbps]: 20,715 / 8,824
Bandwidth (Up/Down) [kbps/kbps]: 828 / 7,320
Data Transferred (Sent/Received) [MB/GB]: 43.61 / 208.35
Output Power (Up/Down) [dBm]: 12.5 / 20.0
Line Attenuation (Up/Down) [dB]: 20.0 / 35.5
SN Margin (Up/Down) [dB]: 5.5 / 8.5
Vendor ID (Local/Remote): TMMB / TSTC
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 3 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 11 / 0
FEC Errors (Up/Down): 6,900 / 27,056
CRC Errors (Up/Down): 16 / 67
HEC Errors (Up/Down): 10 / NA
Need to do a BT Speedtest - but at speedtest.net I got 7Mb/s right away, followed up by a higher 6.  Errors seem to have decreased too - what do you guys think?

[#6]

Update:
Lunchtime speedtest:

[#7]

Hi Robskiwarrior,
Just ran some diagnostics on your line and it is failing due to dropping connection. This may still be a remnant of before the upgrade, but I'd say to open a fault now and if it doesn't settle down at least we have the ball rolling.
Jojo

[#8]

Yea I was gonna leave it to settle for a day because I know it can be a little wobbly after a change - but I will do as you say!

EDIT: Hahaha the fault checker has a fault   Will carry on later...
There's been a problem
Please try using the Broadband Troubleshooter again in a short while. If you continue to have problems please contact our Support Team for help.

[#9]

Stats after 17hrs of uptime:
Link Information
Uptime: 0 days, 17:35:39
DSL Type: G.992.5 annex A
Maximum Bandwidth (Up/Down) [kbps/kbps]: 20,322 / 8,704
Bandwidth (Up/Down) [kbps/kbps]: 804 / 7,224
Data Transferred (Sent/Received) [MB/GB]: 506.08 / 11.17
Output Power (Up/Down) [dBm]: 12.5 / 20.0
Line Attenuation (Up/Down) [dB]: 20.5 / 35.5
SN Margin (Up/Down) [dB]: 5.5 / 8.5
Vendor ID (Local/Remote): TMMB / TSTC
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 0 / 0
FEC Errors (Up/Down): 21,228 / 59,591
CRC Errors (Up/Down): 10,272 / 92
HEC Errors (Up/Down): 2,463 / 978

[#10]

Hi Robskiwarrior,
I'm hoping you're still plugged into the test socket. Could you try another filter, possibly another router. Not sure why your sync is still so low.
Jojo

[#11]

Yup I am still in the test socket.
gonna do the rest of the test at some point today too...

[#12]

Ok so magic happened over night and my IP Profile was changed - I now get 8mbs or there abouts   MUCH better.

I do have an alarming amount of errors from my POV...
Uptime: 0 days, 3:04:33
DSL Type: G.992.5 annex A
Maximum Bandwidth (Up/Down) [kbps/kbps]: 20,584 / 10,280
Bandwidth (Up/Down) [kbps/kbps]: 804 / 9,688
Data Transferred (Sent/Received) [GB/GB]: 68.74 / 4.90
Output Power (Up/Down) [dBm]: 12.5 / 20.0
Line Attenuation (Up/Down) [dB]: 20.5 / 36.0
SN Margin (Up/Down) [dB]: 6.0 / 2.5
Vendor ID (Local/Remote): TMMB / TSTC
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 65,537 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 197,296 / 0
FEC Errors (Up/Down): 49,923 / 20,400,098
CRC Errors (Up/Down): 106,703 / 42,441
HEC Errors (Up/Down): NA / 919,684
It seems like my connection went down a few hours ago as well - but after 3 hours that's how many errors I got 😮
I saw something about uploading sometimes being capped and people having to request them to be uncapped?  Is that something that has to be paid for?

Thanks Jojo for all your work on this - it is MUCH appreciated

[#13]

Yours is already uncapped - I have no idea where the silly maximum upstream bandwidth come from

[#14]

I have no idea Jim - but I really know nothing about ADSL and I thought I might as well ask
Oh and my connection just restarted too btw

[#15]

I am not surprised given the low noise margin and then number of errors