cancel
Showing results for 
Search instead for 
Did you mean: 

Can we scrap 21CN and start again ?

jswift909
Grafter
Posts: 41
Registered: ‎17-03-2010

Re: Can we scrap 21CN and start again ?

Thanks to PlusNet for sorting out my BT profile, it's now:
Download speedachieved during the test was - 2129 Kbps
For your connection, the acceptable range of speedsis 1000-99999 Kbps.
Additional Information:
Your DSL Connection Rate :12472 Kbps(DOWN-STREAM), 888 Kbps(UP-STREAM)
IP Profile for your line is - 10000 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 19.54:22.73:57.73 (SBE:NBE:PBE)
> adsl st
  --------------------------- ATU-R Info (hw: annex A, f/w: annex A) -----------
  Running Mode            : ADSL2+(G.992.5)      State                : SHOWTIME
  DS Actual Rate          : 12473000 bps  US Actual Rate      :  888000 bps
  DS Attainable Rate      : 12484000 bps  US Attainable Rate  :  888000 bps
  DS Path Mode            :  Interleave    US Path Mode        :  Interleave
  DS Interleave Depth    :      64      US Interleave Depth  :        8
  NE Current Attenuation  :      42 dB    Cur SNR Margin      :        3  dB
  DS actual PSD          :    20. 6 dB    US actual PSD        :    12. 6  dB
  ADSL Firmware Version  : 232201_A
  -------------------------------- ATU-C Info ---------------------------------
  Far Current Attenuation :      22 dB    Far SNR Margin      :      11  dB
  CO ITU Version[0]      : 00004946      CO ITU Version[1]    : 0000544e
  DSLAM CHIPSET VENDOR    : < IFTN >
>
Just need to wait for the PlusNet profile to update.  If you can bump it up to 10000 that would be appreciated.  Thanks.