Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Airport Express / PPPoE
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Plusnet Community
- :
- Forum
- :
- Help with my Plusnet services
- :
- Broadband
- :
- Airport Express / PPPoE
Airport Express / PPPoE
06-02-2013 11:31 AM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
Thought I'd share my (eventual) success getting an Apple AirPort Express to do all the routing and turning a modem-router into a modem only bridge.
This is in preparation for fibre when it gets activated at my exchange in a few months.
The modem-router is a Belkin N300. You have to set it up first, turn off the WiFi and then set it to "Modem Only (no Internet sharing)" and make sure to use LLC not VC-MUX, at which point it restarts and you can never get the admin page back
AirPort's WAN to any any old port on the modem.
On AirPort Setup Assistant enter username@plusdsl.net / password for the PPPoE settings.
This is in preparation for fibre when it gets activated at my exchange in a few months.
The modem-router is a Belkin N300. You have to set it up first, turn off the WiFi and then set it to "Modem Only (no Internet sharing)" and make sure to use LLC not VC-MUX, at which point it restarts and you can never get the admin page back
AirPort's WAN to any any old port on the modem.
On AirPort Setup Assistant enter username@plusdsl.net / password for the PPPoE settings.
Message 1 of 3
(2,779 Views)
2 REPLIES 2
Re: Airport Express / PPPoE
07-02-2013 9:53 AM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
Message 2 of 3
(788 Views)
Re: Airport Express / PPPoE
12-02-2013 4:11 AM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
To do this on a Technicolor 582n (adapted from http://community.plus.net/forum/?topic=105753😞
ppp relay flush
ppp flush
eth flush
atm flush
atm phonebook flush
saveall
atm phonebook add name=BrPPPoE_ph addr=0.38
atm ifadd intf=BrPPPoE_atm
atm ifconfig intf=BrPPPoE_atm dest=BrPPPoE_ph encaps=llc ulp=mac
atm ifattach intf=BrPPPoE_atm
eth bridge ifadd intf=BrPPPoE_br
eth bridge ifconfig intf=BrPPPoE_br dest=BrPPPoE_atm
eth bridge ifattach intf=BrPPPoE_br
saveall
Message 3 of 3
(788 Views)
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page