ADSL Exchange and Line Checker Question
See my correction to my post - I forgot about the fixed line. 
As a comparison these are my figures - this is the maximum stable speed - much above that and the error rate in the evening becomes excessive as the noise magin drops below about 5.5dB
Noise Margin: 8.3 dB
Connection Rate: 3776 Kbps
Line Attenuation: 51.0 dB
As a comparison these are my figures - this is the maximum stable speed - much above that and the error rate in the evening becomes excessive as the noise magin drops below about 5.5dB
Noise Margin: 8.3 dB
Connection Rate: 3776 Kbps
Line Attenuation: 51.0 dB
Quote from: Mav Yes - would the Att and noise Margin be different, then for MaxDSL?
The attenuation would be the same, but MaxDSL attempts to get the best out of the line by maximising the speed with the lowest sustainable SNR margin. As usual, Kitz explains it well -
http://kitz.co.uk/adsl/maxdsl.htm
Line quality varies enormously, but you'd be unlucky not to get something decent with 49dB. I'm getting 4608 sync with 52·5dB attenuation.
Hope it goes well.
