21CN-Exchange-Availability checker

[#1]

Here we go; same results. Must state that this is wifi as my Dell has no Network socket.

I could dig out an old Vista pc, with Network port.

[#2]

I'm just trying a session kill from our side, try a speedtest again in a few minutes and see how that looks.

[#3]

Attach- no change.

Here are router stats too: did you want me to refresh connection via Hub s/ware

Product name:	Plusnet Hub
2. Serial number:	[Removed]
3. Firmware version:	Software version 4.7.5.1.83.8.217.1.1 Last updated 13/02/16
4. Board version:	Plusnet Hub One
5. DSL uptime:	1 days, 14:39:11
6. Data rate:	917 / 3395
7. Maximum data rate:	917 / 3608
8. Noise margin:	6.0 / 4.4
9. Line attenuation:	36.2 / 61.3
10. Signal attenuation:	35.8 / 56.4
11. Data sent/received:	1.6 MB / 1.0 MB

Moderator's note by Mike (Mav): Router serial number removed from a public forum

[#4]

If you could try a disconnect/reconnect please. That'll just rule that out.

[#5]

Did that Chris and BT speed for uploads got worse

FAQ 1. Best Effort Test: -provides background information.   Download  Speed   2.6 Mbps 0 Mbps 4 Mbps Max Achievable Speed  Download speedachieved during the test was - 2.6 Mbps  For your connection, the acceptable range of speeds is 1.2 Mbps-4 Mbps.  IP Profile for your line is - 2.99 Mbps 2. Upstream Test: -provides background information.   Upload Speed   0.13 Mbps 0 Mbps 0.83 Mbps Max Achievable Speed Upload speed achieved during the test was - 0.13Mbps  Additional Information:  Upstream Rate IP profile on your line is - 0.83 Mbps

No luck getting my Vista PC to connect to internet via network lead.

PN hub sees it but as disconnected.

[#6]

I'm afraid it's likely to need looking at as a fault then https://faults.plus.net

[#7]

OK.

Hope to do some tests on master socket later, but as it's in loft have to get some extension leads ready.

Have had no luck on getting my old Vista laptop to connect to HubOne via the Ethernet port unfortunately (for speed test) ; have posted separately on that in routers thread.