topic Re: Netgear D7000 in Tech Help - Software/Hardware etc

Netgear D7000

Sheepdog10 — Sat, 14 Jun 2025 13:05:13 GMT

Just moved to full fibre and want to use my older D7000, for a few reasons over the Hub2.

I connect it all and it then asks me for User name and password and if I want Plusnet TV active.

I assume from what I get it is connecting, Just will not let me login says user or password incorect with a little tick next to user name so I assume password is wrong or some other setting.

Can anyone help?

Re: Netgear D7000

mystreet1 — Sat, 14 Jun 2025 13:13:25 GMT

@Sheepdog10

Have a look at this page

https://www.plus.net/help/broadband/broadband-connection-settings/

Gives you what you enter where.

Re: Netgear D7000

Baldrick1 — Sat, 14 Jun 2025 13:20:31 GMT

@Sheepdog10

If following the link from @mystreet1 you must use the third option: 'What settings should I use for a fibre router connected to an Openreach modem', that is, VLAN must be off. This function is handled by the full fibre ONT

Re: Netgear D7000

Sheepdog10 — Sat, 14 Jun 2025 14:08:13 GMT

Thanks @mystreet1.

Thought I had tried every combination, cannot have.

Connected straight away.