topic Re: Billion 7800N IPv6 no longer working in IPv6 Trial

Billion 7800N IPv6 no longer working

brueton — Thu, 14 Jul 2011 16:38:27 GMT

Ipv6 no longer working.
Rebooted modem/router (7800N) followed by all attached devices, Linux, Android & Windows 7.
All these were working with ipv6 prior to the "maintenance" on 12/7/2011.
No changes to any of my systems or Router configuration.
Will report further when I have time.
Anybody else on the ipv6 trial still OK?
PB
[Moderator's note by Jim (Oldjim) Posts split off at the request of PeteB and title changed ]

Re: IPv6 Maintenance

brueton — Sun, 17 Jul 2011 16:34:52 GMT

I manually set the ipv6 address etc. on a Windows 7 PC, ipv6 is working again but only on this device.
My router (7800N) is still picking up an ipv6 address from Plusnet but appears to have stopped handing ipv6 addresses out to attached devices.
I have not changed the router setup, ipv6 stopped working at about the time of the maintenance we were notified about.
Will investigate further when I get a chance.
PB

Re: IPv6 Maintenance

AxeMurderer — Sun, 17 Jul 2011 20:47:08 GMT

I'm still a bit suspicious of the 7800N's IPv6 handling. Yes, it obviously can work, but possibly it can also trip itself up from time to time. It might be worth giving it another reboot (does it always need one more reboot than it should? Like I say, I'm suspicious...)

Re: IPv6 Maintenance

brueton — Mon, 18 Jul 2011 08:29:50 GMT

Will get a chance to look at this on Wednesdaly.
Have tried rebooting a number of times but still not working, it is not helping my speed.
I have a long line, 60dB attenuation, SNR margin is now 12dB.
Waiting to get this sorted out before requesting a reset.
PB

Re: IPv6 Maintenance

brueton — Wed, 20 Jul 2011 14:46:14 GMT

radvd is running on the 7800N router and the radvd.conf file looks OK.
I have now rebooted the router at least 10 times including a factory reset and manually entering all the settings, still no ipv6 except for the static address.
Next step is to use Wireshark

Re: IPv6 Maintenance

brueton — Thu, 21 Jul 2011 10:04:45 GMT

radvdump on a linux box shows that the 7800N is issuing router advertisements. I assume the configuration is from Plusnet via RADIUS.
None of my systems, Windows 7, linux & android are making use of the router advertisements to set up an ipv6 address.
I am handicapped by not having a working router to compare things with.
Can anyone advise on what the problem is?
PB
Output from radvdump
#
# radvd configuration generated by radvdump 1.7
# based on Router Advertisement from fe80::204:****:****:****
# received by interface eth0
#
interface eth0
{
AdvSendAdvert on;
# Note: {Min,Max}RtrAdvInterval cannot be obtained with radvdump
AdvManagedFlag off;
AdvOtherConfigFlag on;
AdvReachableTime 0;
AdvRetransTimer 0;
AdvCurHopLimit 64;
AdvDefaultLifetime 1800;
AdvHomeAgentFlag off;
AdvDefaultPreference medium;
AdvSourceLLAddress on;
prefix 2a02:16c8:****:***::/64
{
AdvValidLifetime 0;
AdvPreferredLifetime 0;
AdvOnLink on;
AdvAutonomous on;
AdvRouterAddr off;
}; # End of prefix definition
}; # End of interface definition

Re: IPv6 Maintenance

brueton — Thu, 21 Jul 2011 15:12:39 GMT

It looks as if the problem may be due to a bug in radvd (version 1.0) on the 7800N.
7800N /var/radvd.conf
interface br0
{
AdvSendAdvert on;
MinRtrAdvInterval 198;
MaxRtrAdvInterval 600;
AdvDefaultPreference medium;
AdvManagedFlag off;
AdvOtherConfigFlag on;
prefix 2a02:16c8:****:****::/64
{
AdvPreferredLifetime infinity;
AdvValidLifetime infinity;
AdvOnLink on;
AdvAutonomous on;
AdvRouterAddr off;
};
};

I copied the radvd.conf file onto a linux box and it worked as expected, radvd (version 1.7).
There was a difference in the radvdump output when identical radvd.conf files were run on the 7800N or the linux box

Linux
AdvPreferredLifetime infinity;
AdvValidLifetime infinity;
7800N
AdvPreferredLifetime 0;
AdvValidLifetime 0;
I then edited the radvd.conf file on the 7800N, removing the two above lines and restarted the radvd daemon.
ipv6 is now working again.
The changes to radvd.conf do need to be reapplied following a router reboot.
I will attempt to raise this with Billion support.
PB

Re: Billion 7800N ipv6 no longer working

Oldjim — Mon, 08 Aug 2011 15:33:43 GMT

i have split these posts off at the request of PeteB as it really isn't related to the IPv6 Maintenance thread.
If I missed any or moved some I shouldn't have please drop me a PM and I will fix it

Re: Billion 7800N IPv6 no longer working

brueton — Mon, 08 Aug 2011 15:41:14 GMT

Problem is still ongoing, ticket raised with Billion support on 21 July 2011 - still waiting for a reply.
I have a manual "fix" I have to apply after each reconnection or reboot.
PB

Re: Billion 7800N IPv6 no longer working

knightnet — Wed, 10 Aug 2011 15:03:32 GMT

Hi again Pete.
Here is my conf file


> cat  /var/radvd.conf
interface br0
{
  AdvSendAdvert on;
  MinRtrAdvInterval 198;
  MaxRtrAdvInterval 600;
  AdvDefaultPreference medium;
  AdvManagedFlag off;
  AdvOtherConfigFlag on;
prefix 2a02:16c8:2000:d00::/64
{
  AdvPreferredLifetime infinity;
  AdvValidLifetime infinity;
  AdvOnLink on;
  AdvAutonomous on;
  AdvRouterAddr off;
};
};

I don't have wireshark to hand just now to test.
How do you manually change the file on the router? And what to?

Re: Billion 7800N IPv6 no longer working

brueton — Wed, 10 Aug 2011 15:17:58 GMT

You might like to edit your earlier posting and hide most of the ipv6 address prefix.
I have sent you a message with my full notes, they were written for my use and therefore assume a knowledge of Linux.
You will need to replace my ipv6 prefix with yours.
I use PuTTY as my terminal emulator and copy and paste the commands from the Word document to the 7800N.
If it works for you please let me know and I will then tidy the notes up and post them in this thread.
PB

Re: Billion 7800N IPv6 no longer working

brueton — Mon, 05 Sep 2011 12:16:38 GMT

Just upgraded my 7800N to firmware 1,06e from the Billion Aussie website.
ipv6 seems to be working again without requiring any manual intervention. This may be a coincidence.
When I get a chance I will downgrade to 1.06d and retest it. Hopefully by then Billion UK will have made 1.06e available and I will upgrade and retest.
PB

Re: Billion 7800N IPv6 no longer working

brueton — Mon, 03 Oct 2011 09:23:56 GMT

I spoke too soon. With 1.06e ipv6 sometimes works, mostly not.
It all seems to be to do with client devices not picking up an ipv6 address. I have set a fixed v6 IP address on a PC and it works 100%.
This problem might be the same as the one reported by mwerle in the thread: PlusNet IPv6 with DrayTek 2750Vn "http://community.plus.net/forum/index.php/topic,98896.0.html
PeteB

Re: Billion 7800N IPv6 no longer working

brueton — Wed, 21 Dec 2011 18:53:59 GMT

Just upgraded my 7800N to firmware 1.06f from the Billion Aussie website.
Problem is still present.
It appears this may be an incompatibility between the IPv6 parts of the 7800N and the Plusnet RADIUS setup.
I stand to be corrected on this and am waiting for a trial 582n to arrive in case it sheds any light on the matter.
Pete

Re: Billion 7800N IPv6 no longer working

BenTrimble — Thu, 22 Dec 2011 09:20:55 GMT

I've got my fingers and toes crossed that the 582n routers will be here today in which case they'll be flashed and sent out today for a slim chance of delivery before Christmas!

Re: Billion 7800N IPv6 no longer working

brueton — Thu, 22 Dec 2011 10:13:42 GMT

I have tested using PPPoE instead of PPPoA over the period of about a week .
It made no difference to the problem, therefore I have gone back to PPPoA.
I have also now reverted back to the 1.06e UK firmware. The 1.06f firmware from the Australian Billion site locked up the IPv6 side of the router a number of times. The IPv4 side continued to work when this happened. This did not happen before the upgrade to 1.06f.
PeteB

Re: Billion 7800N IPv6 no longer working

sjrinfroyle — Thu, 22 Dec 2011 11:40:53 GMT

Quote from: Ben
they'll be flashed and sent out today for a slim chance of delivery before Christmas!

YAY!

Re: Billion 7800N IPv6 no longer working

brueton — Thu, 29 Dec 2011 17:10:50 GMT

Saw this morning that the Australian Billion site now has 1.06f.dc1. Checksum is NOT the same as 1.06f that I have already tried. Will try it out when I get some time to spare.
PeteB

Re: Billion 7800N IPv6 no longer working

ascent — Sat, 14 Jan 2012 16:29:39 GMT

Quote from: PeteB

You will need to replace my ipv6 prefix with yours....

I too am on the trial. I have a 7800N & am struggling with ipv6.
The IPV6 prefix. Should it be obtained automatically by the router, or do I need to request it from plusnet?
Cheers 🙂

Re: Billion 7800N IPv6 no longer working

brueton — Sat, 14 Jan 2012 16:39:35 GMT

It should be obtained from Plusnet automatically by the router. Login to the router with telnet, run a shell, cd /var, cat radvd.conf. The prefix details should be a few lines down.
Following a suggestion from another user I am currently using firmware 1.06b-6 from the australian web site. It seems to work much better for IPv6 on Plusnet.
EDIT: Changed firmware version from 1.06-6 to 1.06b-6
PeteB