topic Re: 7800N problems in IPv6 Trial

7800N problems

brueton — Fri, 13 Dec 2013 20:15:56 GMT

21CN unlimited.
Having problems with getting my 7800N (1.06h) working with IPv6.
It is picking up a LAN IPv6 Address but is not running radvd and therefore the attached devices are not picking up an IPv6 address.
I have carried out a factory reset but it made no difference.
Will try with the latest firmware and older versions when I get a chance.
Pete

Re: 7800N problems

dvorak — Fri, 13 Dec 2013 21:05:01 GMT

I have had it successfully working with IPv6 during the last trial, i'm not running it at the moment though so can't tell you what the firmware was. Sorry.

Re: 7800N problems

pjmarsh — Fri, 13 Dec 2013 22:32:21 GMT

Hi Pete
I'm having the same problem with 1.06g.
Phil

Re: 7800N problems

pjmarsh — Fri, 13 Dec 2013 23:05:39 GMT

I've just upgraded to 1.06h, and it is still doing the same. I've attached screenshots of some of the ipv6 settings on the router, that I am unsure are correct or not (though I have poked about a bit with them without any success), and also one of my Network Connection Details.
Pete, I think this shows the same as you are seeing?
Any suggestions would be most welcome!
Thanks
Phil

Re: 7800N problems

pjmarsh — Fri, 13 Dec 2013 23:42:19 GMT

Right, got it working! On the page shown in my first screenshot, for the field titled "Interface Address / Prefix Length", I posted in my IPv6 address followed by "/56". Then released and renewed the adapter on my laptop, and the got an internet connection via IPv6.
Hope the same works for you Pete.
Thanks
Phil

Re: 7800N problems

brueton — Sat, 14 Dec 2013 14:34:15 GMT

Many thanks for that phil, now working
Pete

Re: 7800N problems

pjmarsh — Mon, 16 Dec 2013 08:41:36 GMT

No problem Pete
Phil