https://community.plus.net/t5/My-Router/On-my-Plusnet-Hub1-can-I-set-the-date-and-time-to-the-correct/m-p/2012186#M42233 <P>For reference I see&nbsp;</P> <LI-CODE lang="markup">curl -s --head http://192.168.1.254 HTTP/1.1 405 Method Not Allowed Content-Type: text/html Cache-Control: public Pragma: cache Expires: Sun, 29 Jun 2025 08:21:50 GMT Date: Sun, 29 Jun 2025 07:51:50 GMT Last-Modified: Mon, 30 Aug 2021 10:45:14 GMT Accept-Ranges: bytes Connection: close</LI-CODE> <P>The time is in GMT</P> <P>Are you saying the Date: line is incorrect?</P> <P>The Hub One does not have a GUI option to set the time, also there is no telnet or ssh access.</P> <P>When the NTP fails to sync a Hub reboot usually resolves the issue</P> <P>You can see NTP activity in the event log locate from the Hubs home page</P> <P>Troubleshooting &gt;Event Log select category NTP&nbsp;</P> <LI-CODE lang="markup">08:25:28, 29 Jun. ( 154.470000) NTP synchronization success! 08:25:24, 29 Jun. ( 150.170000) NTP synchronization start</LI-CODE> <P>&nbsp;</P> Sun, 29 Jun 2025 07:53:04 GMT Dan_the_Van 2025-06-29T07:53:04Z https://community.plus.net/t5/My-Router/On-my-Plusnet-Hub1-can-I-set-the-date-and-time-to-the-correct/m-p/2012182#M42232 <P>On my Plusnet Hub1, can I set the date and time to the correct date and time?</P> <P>The Plusnet Hub 1 web pages have the date header set to <BR /><BR />Date: Mon, 30 Aug 2021 00:06:51 GMT</P> <P>I guess it resets it to 30 Aug 2021 00:00:00 GMT when the router is reset.</P> <P>I had a very old NAS, and the NTP failed to set the date and time</P> <P>To get the time I used: <BR />curl -s --head <A href="http://192.168.1.254" target="_blank">http://192.168.1.254</A> &gt;&gt; temp.txt.</P> <P>On the NAS I could use it to set the hwclock and date and time.</P> Sun, 29 Jun 2025 07:14:12 GMT https://community.plus.net/t5/My-Router/On-my-Plusnet-Hub1-can-I-set-the-date-and-time-to-the-correct/m-p/2012182#M42232 doug1 2025-06-29T07:14:12Z https://community.plus.net/t5/My-Router/On-my-Plusnet-Hub1-can-I-set-the-date-and-time-to-the-correct/m-p/2012186#M42233 <P>For reference I see&nbsp;</P> <LI-CODE lang="markup">curl -s --head http://192.168.1.254 HTTP/1.1 405 Method Not Allowed Content-Type: text/html Cache-Control: public Pragma: cache Expires: Sun, 29 Jun 2025 08:21:50 GMT Date: Sun, 29 Jun 2025 07:51:50 GMT Last-Modified: Mon, 30 Aug 2021 10:45:14 GMT Accept-Ranges: bytes Connection: close</LI-CODE> <P>The time is in GMT</P> <P>Are you saying the Date: line is incorrect?</P> <P>The Hub One does not have a GUI option to set the time, also there is no telnet or ssh access.</P> <P>When the NTP fails to sync a Hub reboot usually resolves the issue</P> <P>You can see NTP activity in the event log locate from the Hubs home page</P> <P>Troubleshooting &gt;Event Log select category NTP&nbsp;</P> <LI-CODE lang="markup">08:25:28, 29 Jun. ( 154.470000) NTP synchronization success! 08:25:24, 29 Jun. ( 150.170000) NTP synchronization start</LI-CODE> <P>&nbsp;</P> Sun, 29 Jun 2025 07:53:04 GMT https://community.plus.net/t5/My-Router/On-my-Plusnet-Hub1-can-I-set-the-date-and-time-to-the-correct/m-p/2012186#M42233 Dan_the_Van 2025-06-29T07:53:04Z https://community.plus.net/t5/My-Router/On-my-Plusnet-Hub1-can-I-set-the-date-and-time-to-the-correct/m-p/2012246#M42236 <P>Thanks for the reply.&nbsp; My router seems to have a problem. I can still access the internet.&nbsp;</P> <PRE>curl -s --head http://192.168.1.254<BR />HTTP/1.1 405 Method Not Allowed<BR />Content-Type: text/html<BR />Cache-Control: public<BR />Pragma: cache<BR />Expires: Tue, 31 Aug 2021 01:09:14 GMT<BR />Date: Tue, 31 Aug 2021 00:39:14 GMT<BR />Last-Modified: Mon, 30 Aug 2021 10:45:14 GMT<BR />Accept-Ranges: bytes<BR />Connection: close</PRE> <P>This curl command is useful for checking the clocks on my raspberry pi , nas and other websites.</P> <P>&nbsp;</P> Mon, 30 Jun 2025 07:27:05 GMT https://community.plus.net/t5/My-Router/On-my-Plusnet-Hub1-can-I-set-the-date-and-time-to-the-correct/m-p/2012246#M42236 doug1 2025-06-30T07:27:05Z