topic Re: Hub2 router on FTTC & FTTP? in My Router

Hub2 router on FTTC & FTTP?

Martini1 — Sun, 15 Jun 2025 14:41:39 GMT

Basic question, but can I ask if presently using a Hub2 router on an FTTC connection will it need to be changed to a different Hub2 if converting to FTTP? Or will the firmware automatically update?

Re: Hub2 router on FTTC & FTTP?

bmc — Sun, 15 Jun 2025 14:46:11 GMT

@Martini1

Same Hub.

The only difference is you remove the phone cable and plug an ethernet cable into the RED WAN port and then into the ONT.

Brian

Re: Hub2 router on FTTC & FTTP?

Martini1 — Sun, 15 Jun 2025 15:13:25 GMT

Thanks 😃

Re: Hub2 router on FTTC & FTTP?

Dan_the_Van — Sun, 15 Jun 2025 15:25:52 GMT

@Martini1

There should be not need to reboot the Hub, as soon as the DSL connection is disconnected the Hub will start auto sensing for a DSL or WAN connection, once the Full Fibre connections goes live it will switch to the WAN port.

Well it did for me!

Re: Hub2 router on FTTC & FTTP?

Martini1 — Sun, 15 Jun 2025 19:38:11 GMT

👍