topic Re: Plusnet Hub Two DSL in My Router

Plusnet Hub Two DSL

Steveo100 — Tue, 04 Feb 2025 20:55:27 GMT

Could someone give me some advice please. The hub has been perfect for a couple of years. I have noticed my phone when connected to my home hub, shows 5GHz. When I initially set the hub up, I switched off the 5GHz setting. When checked, it still is in the off position. Problem is I need an item connected to 2.4GHz and assuming it won't connect because of the unavailable 2.4GHz. I'm at a loss as to what to try next. Please let me know if further info is required.....Tia

Re: Plusnet Hub Two DSL

jab1 — Tue, 04 Feb 2025 21:01:58 GMT

@Steveo100 Can you post a screenshot of this page from your Hub. If you have turned off the 5Ghz but ca still use the router, then the 2.4Ghz band is still active.

Re: Plusnet Hub Two DSL

Steveo100 — Tue, 04 Feb 2025 21:19:39 GMT

Thanks for your reply. Yes can still use the hub, but why would my phone show 5GHz ? I have a screen shot , but how to upload it ?

Re: Plusnet Hub Two DSL

Steveo100 — Tue, 04 Feb 2025 21:22:08 GMT

https://photos.app.goo.gl/CuGL1yo4X1ssrLMAA

Re: Plusnet Hub Two DSL

jab1 — Tue, 04 Feb 2025 21:22:58 GMT

Which phone is it, and where is it showing 5Ghz?

To upload the screenshot, a question - are you using a desktop/laptop or a mobile device?

Re: Plusnet Hub Two DSL

jab1 — Tue, 04 Feb 2025 21:24:43 GMT

That was not the page I asked for, but it clearly shows the 5Ghz band is 'off'.

Re: Plusnet Hub Two DSL

jab1 — Tue, 04 Feb 2025 21:37:11 GMT

To save a lot of toing-and-froing - your 'item' will connect to your Hub , on the 2.4Ghz band.

Re: Plusnet Hub Two DSL

Steveo100 — Tue, 04 Feb 2025 21:43:55 GMT

Ok thanks for your time 👍

Re: Plusnet Hub Two DSL

Dan_the_Van — Wed, 05 Feb 2025 08:56:25 GMT

@Steveo100

Looking at the screen shot you shared, it shows two ethernet devices, it does not show any wireless device connected to the Hub Two, do you have a wireless access point any where?

Re: Plusnet Hub Two DSL

Steveo100 — Wed, 05 Feb 2025 09:53:40 GMT

Thanks for your reply. Yes I have a tp link 8f3c...av 600 which serves a TV, and a nova mesh system.
https://photos.app.goo.gl/UbZDULHjTVKQVXxP8

Re: Plusnet Hub Two DSL

Steveo100 — Wed, 05 Feb 2025 09:55:00 GMT

https://photos.app.goo.gl/Th2cEVmdbCiTcJpY6

Re: Plusnet Hub Two DSL

Townman — Wed, 05 Feb 2025 10:02:49 GMT

So if your phone (or any other device) is seeing a 5GHz SSID then that must be from the other devices … as the router management screen clearly shows that the Hub Two 5GHz SSID is turned off.

Re: Plusnet Hub Two DSL

MisterW — Wed, 05 Feb 2025 10:04:40 GMT

and a nova mesh system

@Steveo100 so its likely that your phone is connected wirelessly to that on the 5ghz band ?

Re: Plusnet Hub Two DSL

Dan_the_Van — Wed, 05 Feb 2025 10:27:02 GMT

With only two ethernet devices being connected to the Hub Two suggests the MESH is working as a router, which results in double NAT.

Why do I say this; the Hub Two will only show connected device it which are on the 192.168.1.0/24 subnet, devices which are connected to the mesh will not as the are hidden behind the Mesh WAN address which will be it's IP Address on the Hub's network.

Re: Plusnet Hub Two DSL

Steveo100 — Thu, 13 Feb 2025 16:03:12 GMT

Apologies for the delay ! I have disconnected both ethernet cables from the router, but cannot connect directly to the router ! It says no internet. I have done a hard reset to no avail. If I reconnect the mesh system, it connects, albeit on 5Ghz which is turned off in the router settings. Tried connecting different devices too. Before I contact Plusnet, has anyone any ideas ? Tia

Moderator's note: Incorrectly assigned Fix removed.

Re: Plusnet Hub Two DSL

Steveo100 — Thu, 13 Feb 2025 13:20:15 GMT

All sorted !

Re: Plusnet Hub Two DSL

jab1 — Thu, 13 Feb 2025 13:30:39 GMT

@Steveo100 What was the solution?