topic Re: TPLink Omada Help in My Router

TPLink Omada Help

BuffaloRun — Mon, 26 Feb 2024 18:48:47 GMT

Hi everyone,

I have a TP Link Omada ER8411 VPN Router at home, which is connected to my new FTTP PlusNet router.

Here is the router technical specification if you are interested: https://www.tp-link.com/uk/business-networking/omada-sdn-router/er8411/

I have put the PlusNet router into Bridge mode, which I believe is Modem Only mode, then configured the Omada Router using PPPoE.

The internet is not available and the Omada logs are saying the PPPoE authentication details are incorrect. I have used the Plusnet username@plusdsl.net and my account password.

Have I missed something?

Re: TPLink Omada Help

Anonymous — Mon, 26 Feb 2024 18:59:56 GMT

@BuffaloRun wrote:

... is connected to my new FTTP PlusNet router
... ...
Have I missed something?

Yes.

If you have FTTP, then you don't need the Plusnet router, you just connect the TP-Link to the Openreach ONT

Re: TPLink Omada Help

Dan_the_Van — Mon, 26 Feb 2024 18:59:12 GMT

@BuffaloRun welcome to the form.

With Full Fibre (FTTP) the ONT is the modem, so remove the Hub two and connect the TP-Link device WAN port directly to the ONT.

HTH

Re: TPLink Omada Help

Anonymous — Mon, 26 Feb 2024 19:21:06 GMT

@BuffaloRun wrote:

I have a TP Link Omada ER8411 VPN Router at home ...

Here is the router technical specification if you are interested: https://www.tp-link.com/uk/business-networking/omada-sdn-router/er8411/

Yikes, I thought that I had one of the most overkill home routers on this forum, but I can't compete with THAT !

Re: TPLink Omada Help

greygit1 — Mon, 26 Feb 2024 21:51:31 GMT

The link for the CLI interface from TP-link's website appears to be incorrect

https://static.tp-link.com/upload/manual/2023/202307/20230725/1910013378_ER605(UN)2.0_CLI.pdf

That's a link (I think) to the omada management stuff.

Re: TPLink Omada Help

bobpullen — Tue, 27 Feb 2024 01:41:48 GMT

Hub Two in Bridge Mode is for xDSL connections. If you have FTTP then you likely need to be getting rid of the Hub Two and put the cost of the Omada to use!

Re: TPLink Omada Help

BuffaloRun — Tue, 27 Feb 2024 12:13:15 GMT

Thanks everyone.

I've got the ER8411 connected into the Openreach box, and it's all working now.

Re: TPLink Omada Help

Anonymous — Tue, 27 Feb 2024 12:30:07 GMT

@BuffaloRun

I'm glad that it was a simple fix to get you working !

What speed FTTP package do you have ?

Given that your ER8411 could easily overwhelm any broadband upstream path, have you checked your connection's "Bufferbloat Grade" using this test - https://www.waveform.com/tools/bufferbloat

If you're not getting an "A" or "A+", you 'should' be able to tune that up using your router's QoS settings.