topic Re: Static IP on PS5 in My Router

Static IP on PS5

Statystyk1984 — Sun, 14 Jan 2024 13:04:53 GMT

Hi,I have purchased static IP and are connected by ethernet cable to my PS5, what I need to do to have it on NAT1?

Re: Static IP on PS5

Anonymous — Sun, 14 Jan 2024 13:42:00 GMT

Does this help ? - Port forwarding a PS4 with Plusnet Hub Two

Re: Static IP on PS5

Mav — Sun, 14 Jan 2024 16:06:25 GMT

Moderator's note(s):

Thread moved from Broadband to My Router.

Re: Static IP on PS5

Statystyk1984 — Mon, 15 Jan 2024 10:40:17 GMT

Hi,Thanks for the topic link.I have added the same rules as on the PS5 section to the firewall on the router settings but the connection is still Nat2

Re: Static IP on PS5

MisterW — Mon, 15 Jan 2024 10:52:06 GMT

NAT Type 1 is only available if your PS5 is connected directly to the internet WITHOUT router. NAT Type 2 is for normal setups that have routers, which what you should be using.

If port forwarding doesn't work, then you might try putting the PS5 in the DMZ.

Re: Static IP on PS5

Statystyk1984 — Mon, 15 Jan 2024 11:11:40 GMT

Hi,I have added DMZ and saved the settings but now I cannot even connect to the router using my static IP address.

Re: Static IP on PS5

Statystyk1984 — Mon, 15 Jan 2024 11:21:54 GMT

I have removed a static IP as why would I pay for something I cannot use,if NAT 1 cannot be enabled using static IP and port forwarding or DMZ then there is no point for me to pay 5 quid for it.

Re: Static IP on PS5

MisterW — Mon, 15 Jan 2024 12:17:24 GMT

if NAT 1 cannot be enabled using static IP

NAT 1 has nothing to do with whether you have a static IP or not. NAT 1 is where the PS5 obtains the public IP rather than a private IP allocated by a router. The only way to get the public IP is for the PS5 to connect directly to the internet , either via a VDSL modem if you have FTTC or to the ONT if you have FTTP. The Ps5 would need to be configured for PPPoE with your PLusnet credentials. Note that, in this configuration, the PS5 would bo open to the internet with the corresponding security problems.

Re: Static IP on PS5

Dan_the_Van — Mon, 15 Jan 2024 12:45:23 GMT

@Statystyk1984

Which router are you using?

Are you confusing a static private IP Address (the device IP Address on your local network) with a static public IP Address (your internet IP address)?

This information might be helpful https://portforward.com/nat-types/ regarding NAT types.

HTH

Re: Static IP on PS5

Anonymous — Mon, 15 Jan 2024 13:24:08 GMT

@Statystyk1984 wrote:

... I have added the same rules as on the PS5 section to the firewall on the router settings but the connection is still Nat2

Having read the link in @Dan_the_Van 's post, it would appear that achieving NAT-1 seems to have been designed to be unnecessarily technically too difficult for the average PS5 home owner to overcome, and therefore the vast majority of players will happily be using NAT-2.

@Statystyk1984 seeing as you are already connected by NAT-2, what actual problems is that causing you ?

Re: Static IP on PS5

dvorak — Mon, 15 Jan 2024 13:24:13 GMT

I've got my PS5 nat-type to show as 'Open', assuming that is what you mean by 'Type 1' with the following rules (some are used for remote play):

Re: Static IP on PS5

Anonymous — Mon, 15 Jan 2024 13:50:47 GMT

@Statystyk1984 wrote:

I have removed a static IP as why would I pay for something I cannot use ... ... there is no point for me to pay 5 quid for it.

The £5 is a one time charge to apply a static WAN IP address to your connection, it is not an ongoing monthly cost.

On Plusnet, those connections with a static IP tend to have less problems than those on dynamic, especially if you will be connecting with foreign game servers that might have geo-restriction - as Plusnet dynamic addresses have frequently been incorrectly reported as being non-UK based by various geo-location services.

Given that you have already paid the one time charge, it would be preferable to re-enable it, even if currently it doesn't help with your NAT issue.

In addition, having a static IP address might be useful to you in future when you convert your telephone line to VoIP, or perhaps if you wanted to setup a 6in4 tunnel on your router to provide IPv6 network connections for your PS5 to bypass IPv4 NAT altogether.

Re: Static IP on PS5

Anonymous — Tue, 16 Jan 2024 21:47:26 GMT

@Statystyk1984

Another useful thing you can do with a static WAN IP address, is setup a ThinkBroadband Broadband Quality Monitor

to create graphs that show your broadband connection's latency and packet loss, which are useful to refer to if you ever suffer lag issues while playing online games.

Re: Static IP on PS5

Statystyk1984 — Tue, 16 Jan 2024 22:33:18 GMT

Problem was my lack of knowledge as didn't know that Nat2 was default while using the router but I wanted an open NAT and after using the port forwarding provided by one of the colleagues here COD is now showing NAT open 👌🏻