topic Re: Dreytek Vigor 2766 in My Router

Dreytek Vigor 2766

leighcocker — Thu, 25 Aug 2022 15:21:00 GMT

Is it possible to use a Dreytek Vigor 2766 with my fibre connection and if so are the support team able to advice me of what settings I need to enter into the Dreytek to connect to my service.

Regards

Leigh

Re: Dreytek Vigor 2766

Baldrick1 — Thu, 25 Aug 2022 15:37:35 GMT

Moved to My Router

Re: Dreytek Vigor 2766

Baldrick1 — Thu, 25 Aug 2022 15:37:35 GMT

@leighcocker

From my reading you can. The settings are here. https://www.plus.net/help/broadband/broadband-connection-settings/
Plusnet may not help with configuration but there are knowledgeable fellow members of this forum who will help.

Re: Dreytek Vigor 2766

MisterW — Thu, 25 Aug 2022 15:37:51 GMT

@leighcocker it should work just fine.

Set WAN1 to VDSL , PPPoE ( see pages 11 onwards of the QSG )

Where it needs username , use <youraccountname>@plusdsl.net and password is the one you use to access the Plusnet portal (member centre). Set the IP Assignment to Dynamic. That's it for any PlusNet specific settings.

Re: Dreytek Vigor 2766

leighcocker — Thu, 25 Aug 2022 15:41:01 GMT

Thanks all, Wil give it a go and hopefully can get connected

Re: Dreytek Vigor 2766

leighcocker — Thu, 25 Aug 2022 16:40:23 GMT

All sorted after a quick call for support for a password reset, thanks guys.