topic Re: Plusnet Hub One - limitation on WPA2 password in My Router

Plusnet Hub One - limitation on WPA2 password

JohnofYork — Sat, 14 May 2022 10:21:29 GMT

So the nice folk in Sheffield have sent me a Plusnet Hub One to replace my old OpenReach modem.

I'd like to configure the wireless to match my previous settings ...

so I change the name of the wireless SSID - no problem.

when I try to change the password to match my existing one I'm told:

"The following three characters cannot be the first in the WPA string ! # ;
(ASCII values 33, 35 and 59 decimal)" [my current pwd starts with one of those]

Never come across this limiation before. It's obviously easier if I can match my exisiting wi-fi passwords rather than changing all of them on the myriad devices which might want to use it.

Is there any way round this bizarre restriction?

Re: Plusnet Hub One - limitation on WPA2 password

Dan_the_Van — Sat, 14 May 2022 12:17:09 GMT

@JohnofYork

I would say the password limitations are setup within the Hub One firmware, so with that in mind I would say it is not possible.

It is a pity they did not send you a Hub Two which can be used in bridge mode which would have allowed you to continue using your current router.

Does your current router work as a wireless access point, if so you could turn off the Hub One wireless and use you current wireless settings.

Dan

Re: Plusnet Hub One - limitation on WPA2 password

Baldrick1 — Sat, 14 May 2022 12:42:01 GMT

@Dan_the_Van wrote:

Does your current router work as a wireless access point, if so you could turn off the Hub One wireless and use you current wireless settings.

All this or using a Hub 2 in bridge mode does is turn a two box solution into a different two box solution, so what's the point? Personally I would take the hit and change all the passwords. Out of interest I have tried setting my Hub 2 with a wireless password starting with ! and that was accepted, so I suspect that a Hub 2 could be used as a single box solution anywy.

Re: Plusnet Hub One - limitation on WPA2 password

RobPN — Sat, 14 May 2022 12:51:17 GMT

Post deleted after post above edited.

Re: Plusnet Hub One - limitation on WPA2 password

Baldrick1 — Sat, 14 May 2022 12:53:05 GMT

Deleted after @RobPN amendment

Re: Plusnet Hub One - limitation on WPA2 password

Dan_the_Van — Sat, 14 May 2022 14:23:53 GMT

my suggestion was based on his current available hardware. He might not get a Hub Two

Re: Plusnet Hub One - limitation on WPA2 password

Baldrick1 — Sat, 14 May 2022 14:42:14 GMT

I get that, my point was that you can start the Hub 2 wireless password with a special character. Therefore there’s no advantage in using the old router plus a Hub 2 in bridge mode as the Hub 2 can meet the requirements on its own.

Re: Plusnet Hub One - limitation on WPA2 password

JohnofYork — Sat, 14 May 2022 16:19:41 GMT

@Baldrick1 @Dan_the_Van @RobPN thanks for the replies.

I was afraid it might be down to the Hub One settings. The Hub one also doesn't appear to let me setup a guest network either, which we also had.

PN sent the Hub One to see if it would fix our speed issues (steady 12-13mbps).

It doesn't so I'll probably revert to my old setup (OR modem & Asus RT-N66U router) once PN have agreed that the problems aren't kit related.

cheers

John