topic Re: CCTV not connecting to hub2 router in My Router

CCTV not connecting to hub2 router

nicanddes — Sun, 24 Apr 2022 13:44:15 GMT

Just upgraded from hub1 to hub 2 router and my Ezviz cctv WiFi cameras won't connect. Went back to hub1 and all fine. Cameras have been reset to wipe previous settings but still no joy on hub2. Cameras are 2.4GHz so I even disabled the 5GHz band of the hub2 to eliminate that but they just don't see the router. Have had to go back to the hub1 for now. Any ideas?

Re: CCTV not connecting to hub2 router

Townman — Sun, 24 Apr 2022 13:56:44 GMT

Does this help - How to solve Wi-Fi configure failed issue? - FAQ - EZVIZ Support (ezvizlife.com)

Re: CCTV not connecting to hub2 router

Baldrick1 — Sun, 24 Apr 2022 14:13:01 GMT

Moderators Note

This topic has been moved from ADSL Broadband

Re: CCTV not connecting to hub2 router

nicanddes — Sun, 24 Apr 2022 16:39:09 GMT

Unfortunately not, tried this already

Re: CCTV not connecting to hub2 router

Dan_the_Van — Sun, 24 Apr 2022 18:19:40 GMT

Did you try making the Hub Two Wireless network name (SSID) the same as the Hub One?

Within the settings of the Hub Two wireless network is the ability to change the mode, the default being one.

It might work, worth a try

Dan

Re: CCTV not connecting to hub2 router

Gel — Mon, 25 Apr 2022 10:08:55 GMT

You may want to erase the PASSWORD shown above

Re: CCTV not connecting to hub2 router

Dan_the_Van — Mon, 25 Apr 2022 10:20:29 GMT

Thanks for the warning about the password, currently the Hub Two is operating in 'Bridge Mode' so Wireless is turned off.

Dan.

Re: CCTV not connecting to hub2 router

nicanddes — Mon, 25 Apr 2022 19:03:29 GMT

This did the trick. Setting router to mode 3 enabled the cctv to pick it up, then upped it back to mode 1 and they remained connected. Thanks