topic Re: Hub two Modem only in My Router

Hub two Modem only

KFordnew — Sun, 27 Mar 2022 12:29:43 GMT

So am trying to setup my Asus RT-AX88U router with the Hub two i switched the hub two to bridge mode and the light shows pink confirming modem only, when to login to the new router CP a message shows which says DCHP not functioning correctly.

I have tried setting DCHP frequency to aggressive mode and no luck, also tried disabling WIFI 6 as i belive to hub two will not support with. Any help will be greatly appreciated.

Re: Hub two Modem only

MisterW — Sun, 27 Mar 2022 12:38:13 GMT

@KFordnew have you configured the WAN setting on the Asus RT-AX88U for PPPoE and entered your PlsuNet credentials ?

also tried disabling WIFI 6 as i belive to hub two will not support with

When in modem mode the Hub 2 wifi is off , so any wifi setting can be used on the Asus RT-AX88U

Re: Hub two Modem only

Dan_the_Van — Sun, 27 Mar 2022 12:51:00 GMT

As @MisterW says everything on the Hub Two is turned off it's now just a modem, you need to connect Hub Two LAN1 2 or 3 to the WAN port of your ASUS router.

Re: Hub two Modem only

KFordnew — Sun, 27 Mar 2022 16:06:06 GMT

What credentials would it need as I’m unsure which username and passwords to enter

Re: Hub two Modem only

dvorak — Sun, 27 Mar 2022 16:29:16 GMT

your plusnet account details, that you would sign into the member centre with.
Username: <pn portal username>@plusdsl.net
Password: <pn portla password>