topic Re: Plusnet Hub 2 - Log in My Router

Plusnet Hub 2 - Log

Correlated — Thu, 03 Feb 2022 00:05:19 GMT

Got my new Plusnet Hub 2 and the event log seems somewhat limited compared to the hub 1,

Certain selections show nothing - for example, If I click 'firewall' filter it just defaults to the 'All' view so I have no idea if my firewall is actually blocking anything or letting everything through or is even on!

Is this how it should be?

Firmware version: v0.05.03.07154-PN

Re: Plusnet Hub 2 - Log

bobpullen — Thu, 03 Feb 2022 13:22:34 GMT

I don't see that here. Whilst certain categories might not be particulalry verbose, I do see entries under the FRWL category

Re: Plusnet Hub 2 - Log

Correlated — Thu, 03 Feb 2022 13:24:49 GMT

Just tried it again and same result.

I just get the 'All' view when the 'FRWL' filter is selected.

Re: Plusnet Hub 2 - Log

bobpullen — Thu, 03 Feb 2022 15:49:27 GMT

What browser are you using and do you have any extensions installed? Does the same happen with other categories? Are you able to try a different browser?

Anyone else around with a Hub Two who could help validate?

Re: Plusnet Hub 2 - Log

198kHz — Thu, 03 Feb 2022 17:06:05 GMT

I used a Hub 2 for a short while when recently upgrading to FTTC before going back to my Billion.

I did notice that on occasion that it would revert to 'All' when trying to select the firewall category. Re-trying one or two times always fixed it.

FWIW using Firefox with only a PDF viewer extension.

Re: Plusnet Hub 2 - Log

Correlated — Thu, 03 Feb 2022 17:37:01 GMT

Chrome (latest version) with ublock origin extension.

I have disabled ublock origin extension and same results.

Happens on quite a few of them to be honest.

Just tried it on Edge (which I don't use so has no extensions and is default setting) and same happens.

Re: Plusnet Hub 2 - Log

bobpullen — Thu, 03 Feb 2022 19:23:14 GMT

Also using Chrome and uBlock origin.

I am running a slightly newer firmware build. Will see if I can revert and replicate.

In the mean time, I wonder if the browser developer console yields any clues (CTRL, Shift + J, select Network category and try fiddling with the event viewer categories a few times).

I also wonder if it works after a reboot (could be somethign to do with memory consumption).

Re: Plusnet Hub 2 - Log

Correlated — Thu, 03 Feb 2022 19:49:58 GMT

Tried fiddling with the developer console with no results.

Interestingly it works once when I do Ctrl + F5 (hard refresh) but then If I click 'All' again and then back to FRWL same issue arises.

Something to do with the cache then?

Will try a reboot when everyone has gone to bed later.

Re: Plusnet Hub 2 - Log

Correlated — Sat, 05 Feb 2022 18:29:55 GMT

Reboot has not resolved it.

Re: Plusnet Hub 2 - Log

mort7890 — Mon, 14 Feb 2022 14:28:20 GMT

Hi @bobpullen

Are you indicating that there is an update to thefirmware

Firmware version:v0.05.03.07154-PN

Firmware updated:Unknown

Re: Plusnet Hub 2 - Log

bobpullen — Mon, 14 Feb 2022 15:03:04 GMT

@mort7890 - you're on the latest. The build I'm running is not ready for public consumption.

With regards to the problems being reported, I'm yet to try replicating on the v0.05.03... build.

Re: Plusnet Hub 2 - Log

mort7890 — Mon, 14 Feb 2022 15:38:04 GMT

Hi @bobpullen many thanks for the information and sorry cannot help you with the replication