topic Re: CWMP / TR-069 on own router in My Router

CWMP / TR-069 on own router

yattyatt — Mon, 18 Oct 2021 18:18:58 GMT

Hi, I noticed on my plusnet-provided router tr-069 messages in the logs.

I've since switched to my own router. I've got it up and running just fine, but was wondering if here is any benefit to configuring CWMP/TR-069 as well?

If so, what values do I set?

Thanks

Re: CWMP / TR-069 on own router

jab1 — Mon, 18 Oct 2021 18:35:58 GMT

@yattyatt I'm not the modem/router expert on here, but I would doubt there's any reason to set it on your own equipment - it is to enable Plusnet to check your PN Hub and send updates as required, which are of no use to 3rd. party equipment.

Re: CWMP / TR-069 on own router

Anoush — Mon, 18 Oct 2021 18:42:01 GMT

Our hardware management platform will only communicate with Plusnet equipment through the TR069 protocol. It’s how we make sure that our devices are kept up to date with the latest firmware and the right credentials for your broadband connection.

You won’t be able to configure your own router to do the latter automatically should you ever change your account password, but presumably it’ll have its own way of getting firmware updates from the manufacturer.

Re: CWMP / TR-069 on own router

yattyatt — Mon, 18 Oct 2021 18:46:00 GMT

Thanks guys. 😀

Re: CWMP / TR-069 on own router

dvorak — Mon, 18 Oct 2021 20:38:56 GMT

Moderators Note

This topic has been moved from ADSL Broadband to My Router